The ZULU-868 Transceiver module is designed to handle wireless telemetry over a distance of up to 2000m. It achieves this while consuming little power especially when is placed into one of its sleep/standby modes. The on-board DC-DC converter allows it to operate with a power supply voltage as low as 0.9V.
RF Transceiver based on Si1000 SoC with 25MHz 8051 microcontroller core, 64KB Flash memory, 4352B RAM EZRadioPRO wireless transceiver RF Carrier Frequency: 848 to 888MHz ISM Band Modulation: FSK, GFSK or OOK RF Power Output: +20dBm Receiver Sensitivity: -121dBm @ 2000bps, GFSK, 0.1% BER OTA Data Rate: 0.123 to 256kbps Range: 2000m (line of sight) Programmable packet handler Supports Frequency Hopping Spread Spectrum (FHSS) operation 64-byte Tx and Rx FIFOs 18 x channel 10-Bit 300ksps ADC GPIO, UART, SPI and I²C I/O ports On-chip debug circuitry Power supply: +1.8 to +3.6Vdc Two built-in brown-out detectors cover sleep and active modes Wale-Up Time: <2us Current consumption: Less than 1uA with RTC running and radio state retained Operating temperature range: -40 to +85°C Available in DIP format (RS 761-9869) or SMT format (RS 761-9862) Dimensions: 25 x 13 x 3mm (DIP), 25 x 11 x 2mm (SMT) Applications: Remote sensing/control, local communication for the Internet-of-Things (IoT)
Note
The Zulu-868 works with the RadioPi wireless dongle for Raspberry Pi, RS 793-4418
