Onlangs gezocht

    Honeywell PX3 Series Pressure Sensor, 0psi Min, 100psi Max, Analogue Output, Absolute Reading

    RS-stocknr.:
    111-5920
    Fabrikantnummer:
    PX3AN2BS100PAAAX
    Fabrikant:
    Honeywell
    Honeywell
    Bekijk alle Pressure Sensors
    2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
    24 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    92,71 €

    (excl. BTW)

    112,18 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 +92,71 €
    RS-stocknr.:
    111-5920
    Fabrikantnummer:
    PX3AN2BS100PAAAX
    Fabrikant:
    Honeywell
    Land van herkomst:
    CN

    Wetgeving en conformiteit

    Land van herkomst:
    CN

    Productomschrijving

    Honeywell PX3 Series Pressure Transducer


    Honeywell PX3 Series heavy duty pressure transducer is a range of highly configurable pressure sensors that use piezoresistive sensing technology with ASIC (Application Specific Integrated Circuit) signal conditioning in a brass housing. The PX3 Series is fully calibrated and compensated for offset, sensitivity, temperature effects and non-linearity using the on-board ASIC.

    Pressure range: 1 bar to 46 bar (absolute and sealed gage)
    Fully calibrated and temperature compensated
    Total Error Band: ±1.0 %FSS from -20 °C to 85 °C [-4 °F to 185 °F]
    Insulation resistance: >100 MOhm, 1500 V dc
    Dielectric strength: AC1500V, 1 min. or AC1800, 1 s
    Current consumption: 3.5 mA max.
    Ingress protection up to IP67
    Response time: <2 ms
    RoHS, REACH, and CE compliant

    Honeywell Heavy-Duty Analogue Pressure Sensor, 100psi Maximum Reading, 0.5 to 4.5V Output - PX3 Series - PX3AN2BS100PAAAX


    Use this heavy-duty pressure sensor from Honeywell when you need accurate readings and a swift response. It uses piezo-resistive sensing technology to cope with fast-changing pressures and has a quick reaction time that's under 2ms (milliseconds). This sensor is precise, with a total error band of ±1% when operating between the temperatures of -20°C and +85°C. As it's frost resistant, the unit is safe to use with HFC (hydrofluorocarbon) refrigerants and works at low temperatures down to -40°C. This means the transducer is ideal for HVAC (heating, ventilation and air conditioning) systems.

    Features & Benefits


    • IP67 ingress protection rating means it's dust-tight and water-resistant for use in demanding industries
    • Comes fully calibrated and temperature-compensated to speed up installation
    • Works with supply voltages between 4.75 and 5.25V DC, so it's useful in a variety of electrical circuits
    • Corrosion-resistant brass housing makes it durable and long-lasting

    Applications


    • Aerospace and transport
    • Food and agriculture industries
    • Pharmaceutical and medical applications

    What fluids can this sensor measure?


    This sensor is designed to measure a range of liquids, including brake oil and hydraulic fluids. It can also measure refrigerants and air.


    Specificaties

    KenmerkWaarde
    Pressure Reading TypeAbsolute
    Minimum Pressure Reading0psi
    Maximum Pressure Reading100psi
    Accuracy±0.25 %
    Output TypeAnalogue
    Media MeasuredAir, Brake Fluid, Hydraulic Fluid, Oil, Refrigeration Fluid
    Process ConnectionNPT 1/8
    Electrical ConnectionMetri-Pack 150
    Analogue Output0.5 → 4.5 V
    Response Time<2 ms
    Maximum Current3 mA
    SeriesPX3
    Supply Voltage4.75 → 5.25 V dc
    Housing MaterialBrass
    Mounting TypeThreaded
    Minimum Operating Temperature-40°C
    Maximum Operating Temperature+125°C
    IP RatingIP67
    2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
    24 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    92,71 €

    (excl. BTW)

    112,18 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 +92,71 €