Honeywell HSCDAND600MG2A3 Piezoresistive Pressure SensorThrough Hole 8 DIP
- RS-stocknr.:
- 226-9644
- Fabrikantnummer:
- HSCDAND600MG2A3
- Fabrikant:
- Honeywell
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 46,33
(excl. BTW)
€ 56,06
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 90 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 9 | € 46,33 |
| 10 - 24 | € 45,13 |
| 25 - 49 | € 43,97 |
| 50 + | € 42,86 |
*prijsindicatie
- RS-stocknr.:
- 226-9644
- Fabrikantnummer:
- HSCDAND600MG2A3
- Fabrikant:
- Honeywell
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Honeywell | |
| Sensor Type | Piezoresistive Pressure Sensor | |
| Maximum Overload Pressure | 200kPa | |
| Product Type | Piezoresistive Pressure Sensor | |
| Mount Type | Through Hole | |
| Package Type | DIP | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 3.3V | |
| Maximum Operating Pressure | 60 kPa | |
| Maximum Supply Voltage | 5V | |
| Accuracy | ±0.25 % | |
| Port Type | Single Axial Barbed | |
| Maximum Operating Temperature | 85°C | |
| Width | 13.3 mm | |
| Standards/Approvals | No | |
| Length | 10mm | |
| Height | 13.75mm | |
| Series | HSC | |
| Minimum Operating Pressure | 0mbar | |
| Automotive Standard | No | |
| Minimum Operating Temperature | -20°C | |
| Alles selecteren | ||
|---|---|---|
Merk Honeywell | ||
Sensor Type Piezoresistive Pressure Sensor | ||
Maximum Overload Pressure 200kPa | ||
Product Type Piezoresistive Pressure Sensor | ||
Mount Type Through Hole | ||
Package Type DIP | ||
Pin Count 8 | ||
Minimum Supply Voltage 3.3V | ||
Maximum Operating Pressure 60 kPa | ||
Maximum Supply Voltage 5V | ||
Accuracy ±0.25 % | ||
Port Type Single Axial Barbed | ||
Maximum Operating Temperature 85°C | ||
Width 13.3 mm | ||
Standards/Approvals No | ||
Length 10mm | ||
Height 13.75mm | ||
Series HSC | ||
Minimum Operating Pressure 0mbar | ||
Automotive Standard No | ||
Minimum Operating Temperature -20°C | ||
The Honeywell HSC series is a piezoresistive silicon pressure sensor offering a ratiometric analog or digital output for reading pressure over the specified full scale pressure span and temperature range. The HSC Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and non linearity using an on board Application Specific Integrated Circuit. The sensor is characterized for operation from a single power supply of either 3.3 Vdc or 5.0 Vdc.
Promotes system reliability and reduces potential system downtime
Allows ultra low pressure sensors to be used continuously well above the calibrated pressure range
Detects most internal failures including burst sensors
Enables extended battery life
Gerelateerde Links
- Honeywell Piezoresistive Pressure Sensor, 60kPa Operating Max, Through-Hole Mount, 8-Pin, 200kPa Overload Max, DIP
- Honeywell Piezoresistive Pressure Sensor, 60kPa Operating Max, Surface Mount, 8-Pin, 200kPa Overload Max, SMT
- Honeywell Piezoresistive Pressure Sensor, 60kPa Operating Max, Surface Mount, 6-Pin, 200kPa Overload Max, SMT
- Honeywell Piezoresistive Pressure Sensor, 60kPa Operating Max, Through-Hole Mount, 6-Pin, 200kPa Overload Max, DIP
- Honeywell Piezoresistive Pressure Sensor, 16kPa Operating Max, Surface Mount, 6-Pin, 60kPa Overload Max, SMT
- Honeywell Piezoresistive Pressure Sensor, 6kPa Operating Max, Surface Mount, 6-Pin, 200kPa Overload Max, SMT
- Honeywell Piezoresistive Pressure Sensor, 100kPa Operating Max, Surface Mount, 8-Pin, 200kPa Overload Max, SMT
- Honeywell Piezoresistive Pressure Sensor, 16kPa Operating Max, Through-Hole Mount, 12-Pin, 60kPa Overload Max, SMT