Fabrikantnummer

Honeywell Technologies Piezoresistive Pressure SensorBoard 8 DIP

RS-stocknr.:: 226-9641
Fabrikantnummer:: HSCDAND030PGSA3
Fabrikant:: Honeywell Technologies

Honeywell Technologies Piezoresistive Pressure SensorBoard 8 DIP

Momenteel niet beschikbaar

We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.

RS-stocknr.:: 226-9641
Fabrikantnummer:: HSCDAND030PGSA3
Fabrikant:: Honeywell Technologies

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell Technologies
	Maximum Overload Pressure	413kPa
	Sensor Type	Piezoresistive Pressure Sensor
	Product Type	Piezoresistive Pressure Sensor
	Mount Type	Board
	Package Type	DIP
	Pin Count	8
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	206 kPa
	Maximum Supply Voltage	5V
	Accuracy	±0.25 %
	Port Type	Single Axial Barbed
	Maximum Operating Temperature	85°C
	Width	13.3mm
	Height	13.75mm
	Length	10mm
	Series	HSC
	Standards/Approvals	ISO 9001
	Minimum Operating Pressure	0psi
	Minimum Operating Temperature	-20°C
	Automotive Standard	ISO 9001

	Alles selecteren
	Merk Honeywell Technologies
	Maximum Overload Pressure 413kPa
	Sensor Type Piezoresistive Pressure Sensor
	Product Type Piezoresistive Pressure Sensor
	Mount Type Board
	Package Type DIP
	Pin Count 8
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 206 kPa
	Maximum Supply Voltage 5V
	Accuracy ±0.25 %
	Port Type Single Axial Barbed
	Maximum Operating Temperature 85°C
	Width 13.3mm
	Height 13.75mm
	Length 10mm
	Series HSC
	Standards/Approvals ISO 9001
	Minimum Operating Pressure 0psi
	Minimum Operating Temperature -20°C
	Automotive Standard ISO 9001

Datasheet - HSCDAND030PGSA3

The Honeywell HSC series is a piezoresistive silicon pressure sensor offering a ratiometric analog or digital output for reading pressure over the specified full scale pressure span and temperature range. The HSC Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and non linearity using an on board Application Specific Integrated Circuit. The sensor is characterized for operation from a single power supply of either 3.3 Vdc or 5.0 Vdc.

Promotes system reliability and reduces potential system downtime

Allows ultra low pressure sensors to be used continuously well above the calibrated pressure range

Detects most internal failures including burst sensors

Enables extended battery life

Gerelateerde Links

Wees als eerste op de hoogte van onze nieuwste producten en aanbiedingen

E-mailadres

De persoonlijke gegevens die u aan ons verstrekt bij het aanmelden voor deze mailinglijst worden verwerkt in overeenstemming met ons privacybeleid.