Honeywell Technologies HSCDANN030PGAA5 Pressure SensorBoard 8 DIP

RS-stocknr.:: 214-1445
Fabrikantnummer:: HSCDANN030PGAA5
Fabrikant:: Honeywell

Honeywell Technologies HSCDANN030PGAA5 Pressure SensorBoard 8 DIP

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 eenheid)*

€ 52,00

(excl. BTW)

€ 62,92

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 04 januari 2027

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 9	€ 52,00
10 - 24	€ 50,44
25 - 49	€ 47,84
50 - 99	€ 45,24
100 +	€ 42,64

*prijsindicatie

RS-stocknr.:: 214-1445
Fabrikantnummer:: HSCDANN030PGAA5
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Product Type	Pressure Sensor
	Maximum Overload Pressure	60psi
	Sensor Type	Piezoresistive Pressure Sensor
	Mount Type	Board
	Package Type	DIP
	Pin Count	8
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	30 psi
	Maximum Supply Voltage	5V
	Accuracy	±0.25 %
	Port Type	Single Axial Barbed
	Maximum Operating Temperature	+85°C
	Length	10mm
	Standards/Approvals	ISO 9001
	Height	13.75mm
	Series	HSC
	Width	13.3mm
	Minimum Operating Pressure	0psi
	Minimum Operating Temperature	-20°C
	Automotive Standard	ISO 9001

	Alles selecteren
	Merk Honeywell
	Product Type Pressure Sensor
	Maximum Overload Pressure 60psi
	Sensor Type Piezoresistive Pressure Sensor
	Mount Type Board
	Package Type DIP
	Pin Count 8
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 30 psi
	Maximum Supply Voltage 5V
	Accuracy ±0.25 %
	Port Type Single Axial Barbed
	Maximum Operating Temperature +85°C
	Length 10mm
	Standards/Approvals ISO 9001
	Height 13.75mm
	Series HSC
	Width 13.3mm
	Minimum Operating Pressure 0psi
	Minimum Operating Temperature -20°C
	Automotive Standard ISO 9001

Datasheet-HSCDANN030PGAA5

Honeywell HSC Series Gauge Pressure Sensor, 30psi Maximum Operating Pressure, ±0.25% Accuracy - HSCDANN030PGAA5

This gauge pressure sensor is a board-mounted device designed to measure pressure referenced to atmospheric conditions within electronic systems. It provides a calibrated, temperature-compensated output for reading pressure across a defined span while operating from a single low-voltage supply. The device is intended for use with non-corrosive, non-ionic gases and, for select ranges, compatible non-corrosive liquids, and is manufactured under ISO 9001 processes.

Features and Benefits:

• ±0.25% accuracy reduces software correction requirements
• Operates from 3.3V or 5.0V for flexible system design
• Fast calibrated output updates for responsive measurement
• Low power consumption minimises system energy draw
• Internal ASIC compensates offset and non-linearity
• Protected against 60 psi overload for enhanced durability

Applications

• Suitable for medical respiratory and ventilator monitoring
• Ideal for HVAC flow and clogged filter detection systems
• Used with gas flow instrumentation and chromatography
• Can be used for industrial barometry and flow calibration
• Suitable for battery-powered portable diagnostic instruments

What electrical Interface options are available?

The device offers a ratiometric analogue output and 12-14-bit digital interfaces compatible with I2C or SPI protocols depending on output selection.

How does the sensor maintain accuracy over temperature?

It uses onboard calibration and temperature compensation for offset, sensitivity, thermal effects, and non-linearity across the compensated range.

Which media are permitted for pressure measurement?

Non-corrosive, non-ionic gases are supported, selected pressure ranges permit non-corrosive, non-ionic liquids on Port 1 only.

What environmental extremes can it withstand during operation?

The sensor is rated to operate between -20°C and 85°C and meets moisture sensitivity and vibration/shock test conditions per the specified standards.

How is the physical connection to fluid systems made?

The device is available with a single axial barbed port option for straightforward tubing attachment.