Honeywell Technologies HSCDRRV001PGSA3 Pressure SensorBoard 8 DIP

RS-stocknr.:: 211-9928
Fabrikantnummer:: HSCDRRV001PGSA3
Fabrikant:: Honeywell

Honeywell Technologies HSCDRRV001PGSA3 Pressure SensorBoard 8 DIP

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 eenheid)*

€ 42,42

(excl. BTW)

€ 51,33

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Op voorraad

95 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 4	€ 42,42
5 - 9	€ 41,27
10 - 24	€ 40,17
25 - 39	€ 39,15
40 +	€ 38,18

*prijsindicatie

RS-stocknr.:: 211-9928
Fabrikantnummer:: HSCDRRV001PGSA3
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Product Type	Pressure Sensor
	Maximum Overload Pressure	69kPa
	Sensor Type	Piezoresistive Pressure Sensor
	Mount Type	Board
	Package Type	DIP
	Pin Count	8
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	6.89 kPa
	Maximum Supply Voltage	5V
	Port Type	Dual Radial Barbed
	Accuracy	±0.25 %
	Maximum Operating Temperature	+85°C
	Height	13.75mm
	Length	10mm
	Standards/Approvals	ISO 9001
	Series	HSC
	Width	13.3mm
	Minimum Operating Pressure	0psi
	Minimum Operating Temperature	-20°C
	Automotive Standard	ISO 9001

	Alles selecteren
	Merk Honeywell
	Product Type Pressure Sensor
	Maximum Overload Pressure 69kPa
	Sensor Type Piezoresistive Pressure Sensor
	Mount Type Board
	Package Type DIP
	Pin Count 8
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 6.89 kPa
	Maximum Supply Voltage 5V
	Port Type Dual Radial Barbed
	Accuracy ±0.25 %
	Maximum Operating Temperature +85°C
	Height 13.75mm
	Length 10mm
	Standards/Approvals ISO 9001
	Series HSC
	Width 13.3mm
	Minimum Operating Pressure 0psi
	Minimum Operating Temperature -20°C
	Automotive Standard ISO 9001

Datasheet - HSCDRRV001PGSA3

Honeywell HSC Series Gauge Pressure Sensor, 3.3V Minimum Supply Voltage, ±0.25% Accuracy - HSCDRRV001PGSA3

This gauge pressure sensor is a board-mounted device designed to measure pressure relative to ambient conditions in low-pressure gas and compatible liquid applications. It provides a calibrated, temperature-compensated output for direct Interface to electronic systems and is intended for use where Compact size and precision are required in instrument and control assemblies.

Features and Benefits:

• ±0.25% accuracy pressure sensor delivers tight measurement precision
• 3.3V board-mounted pressure sensor supports low-voltage systems
• Dual radial barbed port sensor simplifies tubing connections
• DIP package pressure transducer eases through-hole PCB integration
• Low-pressure gauge sensor 69kPa overload increases safety margin
• -20 to 85°C operating pressure sensor suits wide thermal range

Applications

• Suitable for ventilator and respiratory monitoring devices
• Ideal for HVAC filter-clog detection and VAV control
• Used with gas flow instrumentation and flow calibrators
• Can be used in oxygen concentrators and anaesthesia machines
• Used for indoor Air quality and barometry measurements

What media is compatible with the sensor?

It is intended for non-corrosive, non-ionic gases and select non-corrosive, non-ionic liquids for ranges above 40 mbar.

How is output stability maintained over temperature?

On-board ASIC provides calibration and temperature compensation for offset, sensitivity, non-linearity and updates calibrated values at up to 1 kHz analogue.

What electrical interfaces are available?

The device supports a ratiometric analogue output, digital variants offer SPI or I2C-compatible 14-bit output with minimum 12-bit resolution.

How does the sensor perform under long-term use?

The design minimises drift through industry-leading stability characteristics and specifies long-term stability over extended cycle life.

What packaging and approvals apply to the product?

The sensor is supplied in a DIP package with dual radial barbed ports and is manufactured to ISO 9001 standards.