Infineon BGS12WN6E6327XTSA1 RF Switch 6-Pin, PG-TSNP-6-10/PG-TSNP-6-8/PG-TSNP-6-2

RS-stocknr.:: 258-0675
Fabrikantnummer:: BGS12WN6E6327XTSA1
Fabrikant:: Infineon

Infineon BGS12WN6E6327XTSA1 RF Switch 6-Pin, PG-TSNP-6-10/PG-TSNP-6-8/PG-TSNP-6-2

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 verpakking van 10 eenheden)*

€ 2,00

(excl. BTW)

€ 2,40

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 31 mei 2027

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per verpakking*
10 - 90	€ 0,20	€ 2,00
100 - 240	€ 0,191	€ 1,91
250 - 490	€ 0,181	€ 1,81
500 - 990	€ 0,174	€ 1,74
1000 +	€ 0,162	€ 1,62

*prijsindicatie

RS-stocknr.:: 258-0675
Fabrikantnummer:: BGS12WN6E6327XTSA1
Fabrikant:: Infineon

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Infineon
	Product Type	RF Switch
	Interface Type	GPIO
	Minimum Supply Voltage	1.65V
	Package Type	PG-TSNP-6-10/PG-TSNP-6-8/PG-TSNP-6-2
	Pin Count	6
	Maximum Supply Voltage	3.60V
	Maximum Operating Temperature	85°C
	Minimum Operating Temperature	-40°C
	Operating Current	120μA
	Width	700μm
	Length	1.1mm
	Height	375μm
	Standards/Approvals	RoHS and WEEE
	Series	BGS12WN6
	Automotive Standard	No

	Alles selecteren
	Merk Infineon
	Product Type RF Switch
	Interface Type GPIO
	Minimum Supply Voltage 1.65V
	Package Type PG-TSNP-6-10/PG-TSNP-6-8/PG-TSNP-6-2
	Pin Count 6
	Maximum Supply Voltage 3.60V
	Maximum Operating Temperature 85°C
	Minimum Operating Temperature -40°C
	Operating Current 120μA
	Width 700μm
	Length 1.1mm
	Height 375μm
	Standards/Approvals RoHS and WEEE
	Series BGS12WN6
	Automotive Standard No

Datasheet - BGS12WN6E6327XTSA1

Infineon BGS12WN6 Series RF Switch, 1.65 to 3.60V Supply Voltage, 6 Pins - BGS12WN6E6327XTSA1

This RF switch is a Compact surface-mount device designed to route high-frequency signals under GPIO control. It operates across a low-voltage range suitable for battery-powered designs and is intended for applications requiring minimal quiescent drain and a small PCB footprint. The component is specified for use in environments within a defined temperature span and meets common environmental disposal standards.

Features and Benefits:

• Low operating current 120μA minimises power consumption
• GPIO control enables straightforward digital switching
• Wide supply range 1.65 to 3.60V supports varied power rails
• Six-pin package simplifies footprint and routing
• RoHS and WEEE compatibility aids end-of-life handling

Applications

• Suitable for handheld RF modules with limited power budgets
• Ideal for test fixtures requiring GPIO-controlled signal routing
• Used with small wireless sensors needing Compact switching
• Can be used for consumer RF front-end signal selection
• Suitable for prototypes requiring surface-mount RF switching

What voltage range must the device be supplied with?

It requires a supply between 1.65V and 3.60V to operate correctly.

How many electrical connections does it provide for PCB layout?

It offers six pins for signal and control connections on the board.

What is the expected power draw during normal operation?

Typical operating current is about 120μA under normal conditions.

What environmental temperature range can it withstand?

It is rated to function from -40°C up to 85°C.

Which package family should be specified for surface-mount assembly?

Use a PG-TSNP-6 RF switch package variant for SMT placement.