onsemi Type-C CC and SBU Protection IC Evaluation Board Protection Functions for FUSB251

The On Semiconductor, designed to be inserted between a board that contains a Type-C controller and a source of voltage for OVP testing, test points and header switches are ready to test OVP and moisture detection functions on CC and SBU, LED indicators will show power status and Interrupt, if there is not access to a Type-C voltage source, test points (GND and VDD) are available on the board for direct power supply connections, the Type-C receptacle can accept a Type-C device such as Type-C charger or memory stick to demonstrate normal USB functionality.

Dead battery mode provides default Rd presenting on CC1/2
24volt DC tolerant on CC and SBU
35V surge protection on CC and SBU
Over voltage protection on CC and SBU
I2C interface with Interrupt for event notification
Moisture detection on CC and SBU pins
On-chip IEC ESD protection with external capacitor on CAP pin
CC Ron 0.3 ohm Typical
SBU Ron 3 ohm Typical
50Mhz Bandwidth on SBU switch