STMicroelectronics Single-Phase Energy Metering Evaluation Board for STEVAL-IPE023V1 for Shunt Current Sensor Based on

Bekijk deze categorie

Subtotaal (1 eenheid)*

€ 77,17

(excl. BTW)

€ 93,38

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Tijdelijk niet op voorraad
  • Verzending vanaf 31 december 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 77,17

*prijsindicatie

RS-stocknr.:
188-8270
Fabrikantnummer:
EVALSTPM32
Fabrikant:
STMicroelectronics
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

STMicroelectronics

Product Type

Evaluation Board

For Use With

Shunt Current Sensor Based on the STPM32

Kit Classification

Evaluation Board

Featured Device

STEVAL-IPE023V1

Kit Name

Single-Phase Energy Metering Evaluation Board

Standards/Approvals

No

The STPM32 energy metering evaluation board is a class 0.2, single-phase meter with shunt current sensor for power line systems with Vnom= 140 to 300 V(RMS), Inom/ Imax= 5/100 A(RMS), flin= 50/60 Hz ± 10% and Tamb= -40 to +85 °C.

Measured active/reactive power can be output from two programmable LEDs on the board. The board can be interfaced with a PC running evaluation software through an isolated RS232 port, or through the STEVAL-IPE023V1 USB isolated interface tool for configuration and data reading. The board also has SPI/UART pins available to interface a microcontroller for application development.

0.2% accuracy single-phase meter

Vnom(RMS) = 140 to 300 V, Inom/Imax(RMS)= 5/100 A, flin= 50/60 Hz ± 10%

Connector for USB isolated hardware programmer tool STEVAL-IPE023V1 and PC GUI

RS232 and UART isolated connectors to PC GUI

SPI/UART switch for device peripheral selection

2 programmable LEDs on board

Digital expansion to external system-on-chip or MCU

3.3 V power supply: external or through STEVAL-IPE023V1 isolated USB board

Gerelateerde Links