Microchip Non-Volatile Digital Potentiometer Digital Potentiometer for MCP4021-103/OT

Bekijk deze categorie

Subtotaal (1 eenheid)*

€ 30,64

(excl. BTW)

€ 37,07

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Tijdelijk niet op voorraad
  • Verzending vanaf 23 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 30,64

*prijsindicatie

RS-stocknr.:
402-005
Fabrikantnummer:
MCP402XEV
Fabrikant:
Microchip
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Microchip

Power Management Function

Digital Potentiometer

Product Type

Power Management

Kit Classification

Evaluation Board

Featured Device

MCP4021-103/OT

Kit Name

Non-Volatile Digital Potentiometer

Standards/Approvals

ISO

MCP402X Non-Volatile Digital Potentiometer Evaluation Board


The MCP402xEV is a low cost evaluation board that quickly enables the user to exercise all of the features of the MCP402X Non-Volatile Digital Potentiometer. This kit includes 2 PCBs, one populated & one unpopulated. The populated PCB has an MCP4021-103E/SN digital pot configured as a “windowed” potentiometer using a 2.5kΩ pull-up and a 2.5kΩ pull-down resistor. The PCB supports the 8 pin SOIC, SOT-23-6 and SOT-23-5 MCP402X package variations. A 6 pin PIC10F206-I/OT with FLASH memory is utilized to generate all of the Low-Voltage (LV) and High-Voltage (HV) MCP402X serial commands when the 2 momentary switches are depressed in various sequences. This enables the user to Increment and Decrement the wiper, save the setting to EEPROM & exercise the WiperLocktm feature. The PCB also supports the standard ICSP programming header used by the Microchip BFMP low cost programming tool.

MCP4021/4022/4023/4024 support

Small PCB (3.81x3.81 cm) (1.5x1.5 inch)

One populated PCB: MCP4021-103E/SN configured as a “windowed” potentiometer, PIC10F206-I/OT with firmware

Sample firmware to interface the PIC10F206 with push buttons & the MCP402X: Interprets momentary switch inputs to determine what serial command to execute, Uses a high-speed oscillator output to create a low-cost charge pump for HV commands, PCB supports In-Circuit Serial Programming using the BFMP programming header

One un-populated PCB for rapid prototyping of an MCP402X application

Sample kit with 1 PIC10F206-I/OT and 2ea of theMCP4021-I/SN (2.1kΩ, 5kΩ,10kΩ & 50kΩ)

Digital Potentiometer - Microchip


Gerelateerde Links