onsemi NCP1623CDR2G, Power Factor Controller IC 8-Pin, SOIC-8 11.25 V
- RS-stocknr.:
- 254-7618
- Fabrikantnummer:
- NCP1623CDR2G
- Fabrikant:
- onsemi
Subtotaal (1 verpakking van 5 eenheden)*
€ 5,52
(excl. BTW)
€ 6,68
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 2.480 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 5 + | € 1,104 | € 5,52 |
*prijsindicatie
- RS-stocknr.:
- 254-7618
- Fabrikantnummer:
- NCP1623CDR2G
- Fabrikant:
- onsemi
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | onsemi | |
| Product Type | Power Factor Controller IC | |
| Start-up Supply Current | 50μA | |
| Maximum Source Current | 26.25μA | |
| Sub Type | Power Factor Controller IC | |
| Maximum Sink Current | 0.45μA | |
| Mount Type | Surface | |
| Package Type | SOIC-8 | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 9.75V | |
| Maximum Supply Voltage | 11.25V | |
| Minimum Operating Temperature | -40°C | |
| Height | 1.75mm | |
| Length | 5mm | |
| Standards/Approvals | JEDEC | |
| Series | NCP1623 | |
| Width | 4 mm | |
| Maximum Operating Temperature | 125°C | |
| Automotive Standard | AEC-Q2, AEC-Q3, AEC-Q100 | |
| Alles selecteren | ||
|---|---|---|
Merk onsemi | ||
Product Type Power Factor Controller IC | ||
Start-up Supply Current 50μA | ||
Maximum Source Current 26.25μA | ||
Sub Type Power Factor Controller IC | ||
Maximum Sink Current 0.45μA | ||
Mount Type Surface | ||
Package Type SOIC-8 | ||
Pin Count 8 | ||
Minimum Supply Voltage 9.75V | ||
Maximum Supply Voltage 11.25V | ||
Minimum Operating Temperature -40°C | ||
Height 1.75mm | ||
Length 5mm | ||
Standards/Approvals JEDEC | ||
Series NCP1623 | ||
Width 4 mm | ||
Maximum Operating Temperature 125°C | ||
Automotive Standard AEC-Q2, AEC-Q3, AEC-Q100 | ||
The ON Semiconductor NCP series of a controller designed to drive PFC boost stages which is based on an innovative valley synchronized frequency fold back method, it operates in critical conduction mode until the power drops below a threshold level. The PFC controller enters discontinuous conduction mode with increased dead-time as the load further decay. It maximizes the efficiency at both nominal and light loads.
Maximizes the efficiency at both nominal and light loads
Power factor correction
Zero current detection via drain sensing
Gerelateerde Links
- onsemi, Power Factor Controller IC 8-Pin, SOIC-8 11.25 V
- onsemi NCP1623ADR2G, Power Factor Controller IC 8-Pin, SOIC-8 11.25 V
- onsemi, Power Factor Controller IC 72 kHz 8-Pin, SOIC 20 V
- onsemi NCP1654BD133R2G, Power Factor Controller IC 146 kHz 8-Pin, SOIC 20 V
- onsemi NCP1654BD65R2G, Power Factor Controller IC 72 kHz 8-Pin, SOIC 20 V
- onsemi, Power Factor Controller IC 8-Pin, PDIP 36 V
- onsemi MC33262PG, Power Factor Controller IC 8-Pin, PDIP 36 V
- onsemi, Power Factor Controller IC 65 kHz, SOIC-20 30 V