ROHM BD7693FJ-E2, PFC Controller 50 kHz 8-Pin, SOP 38 V
- RS-stocknr.:
- 235-2585
- Fabrikantnummer:
- BD7693FJ-E2
- Fabrikant:
- ROHM
Bulkkorting beschikbaar
Subtotaal (1 verpakking van 10 eenheden)*
€ 5,64
(excl. BTW)
€ 6,82
(incl. BTW)
Voeg 170 eenheden toe voor gratis bezorging
Laatste voorraad RS
- Laatste 30 stuk(s), klaar voor verzending vanaf een andere locatie
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 10 - 40 | € 0,564 | € 5,64 |
| 50 - 90 | € 0,552 | € 5,52 |
| 100 - 240 | € 0,461 | € 4,61 |
| 250 - 990 | € 0,428 | € 4,28 |
| 1000 + | € 0,316 | € 3,16 |
*prijsindicatie
- RS-stocknr.:
- 235-2585
- Fabrikantnummer:
- BD7693FJ-E2
- Fabrikant:
- ROHM
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | ROHM | |
| Product Type | PFC Controller | |
| Start-up Supply Current | 100μA | |
| Maximum Source Current | -0.5A | |
| Sub Type | Power Factor Controller | |
| Maximum Sink Current | 1A | |
| Switching Frequency | 50kHz | |
| Supply Current | 2mA | |
| Zero Power Detection | Yes | |
| Mount Type | Surface | |
| Package Type | SOP | |
| Minimum Supply Voltage | 10V | |
| Pin Count | 8 | |
| Maximum Supply Voltage | 38V | |
| Minimum Operating Temperature | -40°C | |
| Width | 3.9 mm | |
| Height | 1.3mm | |
| Length | 4.9mm | |
| Standards/Approvals | No | |
| Maximum Operating Temperature | 105°C | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk ROHM | ||
Product Type PFC Controller | ||
Start-up Supply Current 100μA | ||
Maximum Source Current -0.5A | ||
Sub Type Power Factor Controller | ||
Maximum Sink Current 1A | ||
Switching Frequency 50kHz | ||
Supply Current 2mA | ||
Zero Power Detection Yes | ||
Mount Type Surface | ||
Package Type SOP | ||
Minimum Supply Voltage 10V | ||
Pin Count 8 | ||
Maximum Supply Voltage 38V | ||
Minimum Operating Temperature -40°C | ||
Width 3.9 mm | ||
Height 1.3mm | ||
Length 4.9mm | ||
Standards/Approvals No | ||
Maximum Operating Temperature 105°C | ||
Automotive Standard No | ||
The ROHM power factor correction IC for AC/DC supplies the system which is suitable for all the products needing power factor improvement. The PFC adopts boundary conduction mode, and switching loss reduction and noise reduction are possible by zero current detection. This IC incorporates a circuit lowering total harmonics distortion and can support IEC61000-3-2 Class-C.
Low THD circuit incorporation
Low power consumption
ZCD by auxiliary winding
Error amplifier input short protection
Stable MOSFET gate drive
Soft start
Gerelateerde Links
- ROHM BD7693FJ-E2, PFC Controller 50 kHz 8-Pin, SOP 38 V
- ROHM BD7694FJ-E2, PFC Controller 50 kHz 8-Pin, SOP-J8 38 V
- ROHM, PFC Controller 50 kHz 8-Pin, SOP-J8 38 V
- ROHM Evaluation Board for BD7693FJ PFC Controller for BD7693FJ for BD7693FJ
- ROHM BD7695FJ-E2, Power Factor Correction IC 8-Pin, SOP-J8 38 V
- ROHM, Power Factor Correction IC 8-Pin, SOP-J8 38 V
- BA2904F-E2 ROHM, Op Amp, 500kHz 1 kHz, 8-Pin SOP
- BA4560RF-E2 ROHM, Low Noise, Op Amp, 10MHz 10 kHz, 8-Pin SOP