onsemi, Power Factor Controller IC 130 kHz 16-Pin, SOIC 20 V
- RS-stocknr.:
- 161-2616
- Fabrikantnummer:
- NCP1631DR2G
- Fabrikant:
- onsemi
Subtotaal (1 rol van 2500 eenheden)*
€ 1.877,50
(excl. BTW)
€ 2.272,50
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 31 augustus 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 2500 + | € 0,751 | € 1.877,50 |
*prijsindicatie
- RS-stocknr.:
- 161-2616
- Fabrikantnummer:
- NCP1631DR2G
- Fabrikant:
- onsemi
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | onsemi | |
| Product Type | Power Factor Controller IC | |
| Start-up Supply Current | 100μA | |
| Maximum Source Current | 500mA | |
| Sub Type | Power Factor Controller | |
| Switching Frequency | 130kHz | |
| Maximum Sink Current | 800mA | |
| Supply Current | 7mA | |
| Zero Power Detection | Yes | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Pin Count | 16 | |
| Minimum Supply Voltage | 10V | |
| Maximum Supply Voltage | 20V | |
| Minimum Operating Temperature | -55°C | |
| Length | 10mm | |
| Width | 4 mm | |
| Height | 1.5mm | |
| Series | NCP1631D | |
| Standards/Approvals | No | |
| Maximum Operating Temperature | 150°C | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk onsemi | ||
Product Type Power Factor Controller IC | ||
Start-up Supply Current 100μA | ||
Maximum Source Current 500mA | ||
Sub Type Power Factor Controller | ||
Switching Frequency 130kHz | ||
Maximum Sink Current 800mA | ||
Supply Current 7mA | ||
Zero Power Detection Yes | ||
Mount Type Surface | ||
Package Type SOIC | ||
Pin Count 16 | ||
Minimum Supply Voltage 10V | ||
Maximum Supply Voltage 20V | ||
Minimum Operating Temperature -55°C | ||
Length 10mm | ||
Width 4 mm | ||
Height 1.5mm | ||
Series NCP1631D | ||
Standards/Approvals No | ||
Maximum Operating Temperature 150°C | ||
Automotive Standard No | ||
The NCP1631 is a controller for use in 2-phase interleaved power factor correction pre-converters. Interleaving consists of paralleling two small stages in lieu of a single big stage. This approach has several merits like ease of implementation, Ability to use smaller components, and better distribution of heating. These attributes make the interleaved PFC topology attractive to slim form factor applications such as flat panel TVs and ultra-slim notebook adapters.
180° out of phase operation
Frequency foldback at low power
Integrated Over current protection, overvoltage protection, UVLO, and brown-out protection
Frequency clamped critical conduction mode (FcCrM) operation
Low EMI and reduces RMS current in the bulk capacitor
Improved light load efficiency
Increased robustness with few external components
Optimized efficiency over the load range
Gerelateerde Links
- onsemi NCP1631DR2G, Power Factor Controller IC 130 kHz 16-Pin, SOIC 20 V
- onsemi, Power Factor Controller IC 130 kHz 16-Pin, SOIC 10.4 V
- onsemi, Power Factor Controller IC 130 kHz 10-Pin, SOIC 35 V
- onsemi, Power Factor Controller IC 130 kHz 16-Pin, SOIC 30 V
- onsemi NCP1680ABD1R2G, Power Factor Controller IC 130 kHz 16-Pin, SOIC 30 V
- onsemi NCP1618FDR2G, Power Factor Controller IC 130 kHz 10-Pin, SOIC 35 V
- onsemi NCP1618HDR2G, Power Factor Controller IC 130 kHz 10-Pin, SOIC 35 V
- onsemi NCP1632DR2G, Power Factor Controller IC 130 kHz 16-Pin, SOIC 10.4 V