SMC 200 L/s 3/8 in Rc Pneumatic Separator, 1 bar to 1 Mpa
- RS-stocknr.:
- 234-4162
- Fabrikantnummer:
- AMJ3000-03B
- Fabrikant:
- SMC
Subtotaal (1 eenheid)*
€ 144,48
(excl. BTW)
€ 174,82
(incl. BTW)
Voeg 1 eenheid toe voor gratis bezorging
Tijdelijk niet op voorraad
- Verzending vanaf 16 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 144,48 |
*prijsindicatie
- RS-stocknr.:
- 234-4162
- Fabrikantnummer:
- AMJ3000-03B
- Fabrikant:
- SMC
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SMC | |
| Product Type | Pneumatic Separator | |
| Port Size | 3/8 in Rc | |
| Maximum Flow Rate | 200L/s | |
| Series | AMJ | |
| Seal Material | Nitrile Rubber (NBR) | |
| Maximum Operating Pressure | 1 Mpa | |
| Minimum Operating Temperature | 5°C | |
| Maximum Operating Temperature | 60°C | |
| Minimum Operating Pressure | 1bar | |
| Standards/Approvals | No | |
| Overall Height | 53mm | |
| Overall Width | 53mm | |
| Bowl Material | Polycarbonate | |
| Alles selecteren | ||
|---|---|---|
Merk SMC | ||
Product Type Pneumatic Separator | ||
Port Size 3/8 in Rc | ||
Maximum Flow Rate 200L/s | ||
Series AMJ | ||
Seal Material Nitrile Rubber (NBR) | ||
Maximum Operating Pressure 1 Mpa | ||
Minimum Operating Temperature 5°C | ||
Maximum Operating Temperature 60°C | ||
Minimum Operating Pressure 1bar | ||
Standards/Approvals No | ||
Overall Height 53mm | ||
Overall Width 53mm | ||
Bowl Material Polycarbonate | ||
- Land van herkomst:
- JP
The SMC series AMJ is effective for removing water droplets from the air sucked into vacuum pumps and ejectors. Over 90% of droplets can be removed through the use of a special water droplet removing element. The provision of a drain cock makes it possible to discharge the drain manually after breaking the vacuum.
Removes water droplets from air by simply installing in vacuum lines
Prevents malfunction of vacuum pumps and ejectors
Over 90% of water droplets can be removed using a dedicated element
Gerelateerde Links
- SMC 200 L/min 1/4 in Pneumatic Separator, 1 MPa to 1 Mpa
- SMC 200 L/s 3/8 in Rc Pneumatic Separator, 1 bar to 1 Mpa
- SMC 200 L/min 1/4 in Pneumatic Separator, -750 mmHg to 1 Mpa
- SMC 3.33 L/s 3/8 in Pneumatic Separator, 5 μm filtration, 0.1 MPa to 10 bar
- SMC 200 L/s 1/4 in G Mist Separator, 0.05 MPa to 1 Mpa
- SMC 200 L/s 2 mm Pneumatic Separator, 5 μm filtration, 0.1 MPa to 10 bar
- SMC 200 L/min 1/4 in Mist Separator, 0.3 μm filtration, 0.05 MPa to 1.5 Mpa
- SMC 300 L/min 1/2 in G Pneumatic Separator, 0.1 MPa to 100 bar