Norgren 5 μm Replacement Filter Element for Excelon Plus

Bekijk deze categorie
Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 22,73

(excl. BTW)

€ 27,50

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 6 stuk(s) klaar voor verzending
  • 6 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 - 4€ 22,73
5 - 9€ 22,04
10 +€ 21,34

*prijsindicatie

RS-stocknr.:
182-9641
Fabrikantnummer:
840038-50KIT
Fabrikant:
Norgren
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Norgren

Product Type

Replacement Filter Element

Filtration Size

5μm

For Use With

Excelon Plus

Material

ABS (Cover), Sintered Polypropylene, Aluminium Body, Bowl-Aluminium or Polycarbonate/Polypropylene, Elastomers - Nitrile, Polypropylene

For Removal

Particle, Oil

Standards/Approvals

2014/34/EU, Class 6 (5 μm) and Class 7 (40 μm), ATEX Certification No, ISO 4414:2010, ISO 80079-36:2016, ISO 80079-37:2016, ISO 8573-1

Land van herkomst:
GB

IMI Norgren Replacement Filter Element, 10 Bar Maximum Output Pressure, Polypropylene Construction - Excelon Plus Series - 840038-50KIT


Does your air preparation kit need to clean up its act? Make it happen with this replacement filter element from IMI Norgren. This unit's polypropylene body withstands heat and impact, making it the right choice for rugged industrial environments. It's compatible with settings that deliver up to 10 bar of output pressure, so heavy-duty applications won't put a dent in its work rate. As this piece of kit is easy to install as a replacement for a perished part, your system will be up and running again quickly.

Features & Benefits


• 5μm filtration size to remove small contaminants and prevent blockages

• Safe to use in temperatures ranging between -10°C and +60°C, making it the right choice for challenging conditions

Applications


• Assembly lines

• Aerospace industry

• HVAC systems

How do I install this replacement filter element?


First, remove the filter bowl. To do this, pull the red clip down and push the bowl up. Turn the container clockwise until it stops and pull it off the device. Next, using a screwdriver or punch, unclip and remove the old filter element and replace it. You should always keep an eye on the status indicator on the filter so you know when you need to change the element.

Gerelateerde Links