Festo VAEM series Serial Interface
- RS-stocknr.:
- 136-6948
- Fabrikantnummer:
- VAEM-L1-S-M1-44
- Fabrikant:
- Festo
Subtotaal (1 eenheid)*
€ 50,42
(excl. BTW)
€ 61,01
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 2 stuk(s) klaar voor verzending
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 50,42 |
*prijsindicatie
- RS-stocknr.:
- 136-6948
- Fabrikantnummer:
- VAEM-L1-S-M1-44
- Fabrikant:
- Festo
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Festo | |
| Manufacturer Series | VAEM | |
| Connection Type | 44-Pin D-Sub Plug | |
| Alles selecteren | ||
|---|---|---|
Merk Festo | ||
Manufacturer Series VAEM | ||
Connection Type 44-Pin D-Sub Plug | ||
- Land van herkomst:
- BG
VAEM Manifold Electrical Interfaces
Multi-pin Plug Connection
• 25 pin 136-6947, 44 pin 136-6948
• Standardised interface for direct connection to the fieldbus by mounting the bus node CTEU or to an IO-Link master via a cable
• Each pin on the multi-pin plug can actuate exactly one solenoid coil
• With 24 valve positions, 48 valve functions can be addressed
• The valves can be switched by means of positive or negative logic
• Standardised interface for direct connection to the fieldbus by mounting the bus node CTEU or to an IO-Link master via a cable
• Each pin on the multi-pin plug can actuate exactly one solenoid coil
• With 24 valve positions, 48 valve functions can be addressed
• The valves can be switched by means of positive or negative logic
I-Port interface/IO-Link
• 8 valve 136-6931, 16 valve 136-6999, 24 valve 136-7000
• I-Port interface for bus nodes (CTEU)
• IO-Link mode for direct connection to a higher-order IO-Link master
• CANopen, DeviceNet, PROFIBUS, CC-LINK, EtherCAT protocols are supported in connection with the associated CTEU bus node
• The electrical supply/transmission of communication takes place via an M12 plug connector
• I-Port interface for bus nodes (CTEU)
• IO-Link mode for direct connection to a higher-order IO-Link master
• CANopen, DeviceNet, PROFIBUS, CC-LINK, EtherCAT protocols are supported in connection with the associated CTEU bus node
• The electrical supply/transmission of communication takes place via an M12 plug connector
Manifold Sub-bases and End-plates