SMC EX510 series Pneumatic Logic Controller
- RS-stocknr.:
- 426-828
- Fabrikantnummer:
- EX510-DYP3
- Fabrikant:
- SMC
Subtotaal (1 eenheid)*
€ 182,12
(excl. BTW)
€ 220,37
(incl. BTW)
Voeg 1 eenheid toe voor gratis bezorging
Tijdelijk niet op voorraad
- Verzending vanaf 10 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 182,12 |
*prijsindicatie
- RS-stocknr.:
- 426-828
- Fabrikantnummer:
- EX510-DYP3
- Fabrikant:
- SMC
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SMC | |
| Product Type | Pneumatic Logic Controller | |
| Series | EX510 | |
| Number of Inputs | 3 | |
| Voltage | 24 V | |
| Display Type | LED Indicator | |
| Hazardous Area Certification | No | |
| Number of Outputs | 4 | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | -10°C | |
| Standards/Approvals | UL, CSA, CE/UKCA | |
| Width | 70 mm | |
| Height | 31mm | |
| Depth | 19.6mm | |
| Suitable Medias | Air | |
| Connection Type | M12 | |
| Output Type | PNP | |
| Alles selecteren | ||
|---|---|---|
Merk SMC | ||
Product Type Pneumatic Logic Controller | ||
Series EX510 | ||
Number of Inputs 3 | ||
Voltage 24 V | ||
Display Type LED Indicator | ||
Hazardous Area Certification No | ||
Number of Outputs 4 | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature -10°C | ||
Standards/Approvals UL, CSA, CE/UKCA | ||
Width 70 mm | ||
Height 31mm | ||
Depth 19.6mm | ||
Suitable Medias Air | ||
Connection Type M12 | ||
Output Type PNP | ||
- Land van herkomst:
- JP
The SMC EX510 Output Unit series makes it possible to connect more valves and sensors than with conventional units. With the introduction of the EX510 series, only a power supply cable to the GW unit is required, resulting in wire-savings. Setting the address for the SI unit, output unit and input unit is no longer required, only the address for the GW unit needs to be set. The volume ratio of the EX510 SI unit is 60% more compact than the EX120.
Output units with a maximum of 16 output points
Cage clamp type terminal base which does not need to be screwed
Compliant to either NPN or PNP
Gerelateerde Links
- SMC EX510 series Serial Interface
- SMC Pneumatic Logic Controller
- SMC EX250 series Pneumatic Logic Controller
- SMC EX9 series Pneumatic Logic Controller
- SMC EX260 series Pneumatic Logic Controller
- SMC EX600 series Pneumatic Logic Controller
- SMC EX245 series 0.7 Mpa Pneumatic Logic Controller
- SMC EX600 series 0.7 Mpa Pneumatic Logic Controller