SKF TSN 513 A Ring Seal -, 60mm ID
- RS-stocknr.:
- 212-1470
- Fabrikantnummer:
- TSN 513 A
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 45,99
(excl. BTW)
€ 55,65
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- Plus verzending 3 stuk(s) vanaf 22 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 45,99 |
*prijsindicatie
- RS-stocknr.:
- 212-1470
- Fabrikantnummer:
- TSN 513 A
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Inside Diameter | 60mm | |
| Centre Height | 80mm | |
| Mount Hole Size | 16 mm | |
| Length | 275mm | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Inside Diameter 60mm | ||
Centre Height 80mm | ||
Mount Hole Size 16 mm | ||
Length 275mm | ||
- Land van herkomst:
- LT
SKF Ring Seal, Single-Lip Type, 60mm ID, 85.5mm OD, 11.8mm Width - TSN 513 A
Want to say goodbye to high-maintenance bearings? Keep debris out and lubrication in by adding this ring seal from SKF to your setup. The lip tucks into the seal groove in your housing to stop dirt in its tracks. As each pack comes with two seals, you have everything you need to block out contaminants from both sides of your joint. If you're working in a highly contaminated environment, you can use this device to take a belt-and-braces approach by doubling up your bearing's existing seal.
Features & Benefits
• Nitrile rubber lip is resistant to wear, abrasion and oil
• Light weight of 65g doesn't strain your bearing
• Compatible with 60mm shafts to suit small and medium components
• Light weight of 65g doesn't strain your bearing
• Compatible with 60mm shafts to suit small and medium components
Applications
• Construction sites
• Manufacturing sector
• Automotive industry
• Manufacturing sector
• Automotive industry
What's the difference between V-ring seals and four-lip seals?
The difference between these types of seals is their number of lips – V-ring seals like this one have a single lip, while four-lip seals have four. Widely compatible V-ring options are easier to install but offer less comprehensive protection than four-lip alternatives.