INA RSHE30-XL-N Plummer Block House -, 30 mm ID
- RS-stocknr.:
- 191-4465
- Fabrikantnummer:
- RSHE30-XL-N
- Fabrikant:
- INA
Ontvang bulkkorting
Voeg 5 meer toe om € 17,45 te besparen
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 87,50
(excl. BTW)
€ 105,88
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 01 januari 2027
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Bespaar |
|---|---|---|
| 1 - 4 | € 87,50 | - |
| 5 - 9 | € 84,01 | € 17,45 |
| 10 - 24 | € 82,27 | € 52,30 |
| 25 + | € 80,50 | € 175,00 |
*prijsindicatie
- RS-stocknr.:
- 191-4465
- Fabrikantnummer:
- RSHE30-XL-N
- Fabrikant:
- INA
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | INA | |
| Inside Diameter | 30mm | |
| Product Type | Plummer Block House | |
| Material | Cast Iron | |
| Centre Height | 42.9mm | |
| Mount Hole Size | M10 | |
| Length | 98mm | |
| Depth | 48.5mm | |
| Mount Hole Centre-to-Centre | 76.2mm | |
| Height | 82mm | |
| Standards/Approvals | No | |
| Series | RSHE | |
| Alles selecteren | ||
|---|---|---|
Merk INA | ||
Inside Diameter 30mm | ||
Product Type Plummer Block House | ||
Material Cast Iron | ||
Centre Height 42.9mm | ||
Mount Hole Size M10 | ||
Length 98mm | ||
Depth 48.5mm | ||
Mount Hole Centre-to-Centre 76.2mm | ||
Height 82mm | ||
Standards/Approvals No | ||
Series RSHE | ||
INA housing units are available as plummer block, flanged and take-up housing units in numerous different designs. The units are ready-to-fit and comprise INA cast iron or sheet steel housings in which INA radial insert ball bearings are fitted. In order to ensure function and reliability under all operating conditions, the bearings and housings are matched to each other. Due to the spherical outside surface of the bearing outer ring and the concave housing bore, housing units can compensate for static angular misalignment of the shaft. The units are used predominantly as locating bearings, but are also suitable as non-locating bearings under low loads and speeds. The housings are screw mounted on the adjacent construction. Less stringent tolerances are sufficient for the screw mounting surfaces.
Gerelateerde Links
- INA RSHE30-TV-VA-FD Plummer Block House -, 30 mm ID
- INA RASEY30-XL-N Plummer Block House -, 30 mm ID
- INA PASE30-XL-N Plummer Block House -, 30 mm ID
- INA PSHE30-XL-N Plummer Block House -, 30 mm ID
- INA PASEY30-XL-N Plummer Block House -, 30 mm ID
- INA PASEY25-XL-N Plummer Block House -, 25 mm ID
- INA RASE25-XL-N Plummer Block House -, 25 mm ID
- INA PSHE50-XL-N Plummer Block House -, 50 mm ID
