SKF TSN 508 C Ring Seal -, 57mm ID
- RS-stocknr.:
- 586-921
- Fabrikantnummer:
- TSN 508 C
- Fabrikant:
- SKF
Subtotaal (1 verpakking van 10 eenheden)*
€ 268,27
(excl. BTW)
€ 324,61
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 13 januari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Verpakking(en) | Per verpakking | Per stuk* |
|---|---|---|
| 1 + | € 268,27 | € 26,827 |
*prijsindicatie
- RS-stocknr.:
- 586-921
- Fabrikantnummer:
- TSN 508 C
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Inside Diameter | 57mm | |
| Bearing Unit Type | Locating Ring Accessory | |
| Material | Felt | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Inside Diameter 57mm | ||
Bearing Unit Type Locating Ring Accessory | ||
Material Felt | ||
- Land van herkomst:
- LT
Molex Milli-Grid Crimp Terminals
A range of receptacle and pin crimp terminals for use in Milli-Grid series plug and receptacle connector housings
The SKF Felt seals provide a simple and effective sealing solution. They accommodate relatively high shaft speeds, because a small gap forms between the felt and shaft, transforming the seal into a non-contact, gap-type seal. Felt seals do not limit axial movements of the shaft.
Easy to install
Cost effective
Suitable for relatively high shaft speeds
Cost effective
Suitable for relatively high shaft speeds
Molex 2.0 mm Milli-Grid Interconnection System
The Milli-Grid connector system is a high density connector system based on a 2 x 2 mm grid pattern offering design flexibility for board to board and cable to board applications. The Milli-Grid family of connectors consists of shrouded and unshrouded headers, single and dual row receptacles, connector housings and crimp terminals