Siemens SIWAREX U Series Monitoring Module for Use with Belt Tensioning Measurement, Fill-Level Monitoring, Industrial
- RS-stocknr.:
- 144-2578
- Fabrikantnummer:
- 7MH4950-2AA01
- Fabrikant:
- Siemens
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
- RS-stocknr.:
- 144-2578
- Fabrikantnummer:
- 7MH4950-2AA01
- Fabrikant:
- Siemens
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Siemens | |
| Accessory Type | Monitoring Module | |
| Product Type | Monitoring Module | |
| Series | SIWAREX U | |
| For Use With | Belt Tensioning Measurement, Fill-Level Monitoring, Industrial Elevators, Rolling Mills, Weighing Electronics | |
| Hazardous Area Certification | EAC | |
| Standards/Approvals | UL | |
| Communication Protocol | I/O | |
| Supply Voltage | 24V | |
| Alles selecteren | ||
|---|---|---|
Merk Siemens | ||
Accessory Type Monitoring Module | ||
Product Type Monitoring Module | ||
Series SIWAREX U | ||
For Use With Belt Tensioning Measurement, Fill-Level Monitoring, Industrial Elevators, Rolling Mills, Weighing Electronics | ||
Hazardous Area Certification EAC | ||
Standards/Approvals UL | ||
Communication Protocol I/O | ||
Supply Voltage 24V | ||
- Land van herkomst:
- DE
Siemens Monitoring Module, 2 Analogue Inputs, 24V Voltage Category - SIWAREX U Series - 7MH4950-2AA01
Looking for a reliable measurement solution for your industrial weighing equipment? Turn to this monitoring module from Siemens. Thanks to a two-channel design, it's an efficient choice that you can connect with two sensors at once. For easy assembly, it's compatible with automated industrial systems from the S7-300 range. The built-in diagnostic system lets you carry out quick troubleshooting to improve its performance. This unit is resistant to shock and vibrations, so it's suitable for use with heavy-duty machinery. You can use it to monitor everything from the strength of crane loads on construction sites to the fill level of bunkers.
• High accuracy rating of 0.05% for reliability
• Monitors minimum and maximum limit values for versatility
• High 16-bit measurement resolution for clear signal transmissions
• Factory calibration enables quick adjustment of scale without adjustment weights
• DIN rail mounting for easy setup
How do I configure this module?
You can configure this module using the SIWATOOL U programme. For effective operation, this lets you set the measurement parameters of the scale, as well as the limit values.
Gerelateerde Links
- Pilz PNOZ X PNOZ X3 Emergency Stop Safety Relay, 24 V dc, 110V ac, Dual-Channel, 3 Safety Contacts
- RS PRO 4 Way Male 4 Pin Molex to 4 Way Female 4 Pin Molex Wire to Board Cable, 2m
- PR Electronics 4100 Series Universal Transmitter, Universal Input, Current, Voltage Output, 19.2 → 300 V dc,
- Festo Natural Round Plastic Tube x 4mm OD x 2.6mm ID x 1.4mm
- Siemens SIMATIC S7-1200 Series PLC CPU for Use with SIMATIC S7-1200 Series, Digital, Transistor Output, 14 (Digital, 2
- PR Electronics 4100 Series Universal Transmitter, Universal Input, Current, Voltage, Relay Output, 19.2 → 300 V
- Siemens LOGO! Series PLC CPU Starter Kit for Use with LOGO! V8.3, 115 V ac/dc, 230 V ac/dc Supply, Relay Output,
- Pilz PNOZ X PNOZ X1 Emergency Stop Safety Relay, 24V ac/dc, Single Channel, 3 Safety Contacts