INA GE30-FW-2RS-A 30mm Bore Plain Bearing, 55 mm OD, 353 kN
- RS-stocknr.:
- 191-3877
- Fabrikantnummer:
- GE30-FW-2RS-A
- Fabrikant:
- INA
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 147,20
(excl. BTW)
€ 178,11
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 13 oktober 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 147,20 |
| 5 - 9 | € 141,32 |
| 10 - 24 | € 138,38 |
| 25 + | € 135,43 |
*prijsindicatie
- RS-stocknr.:
- 191-3877
- Fabrikantnummer:
- GE30-FW-2RS-A
- Fabrikant:
- INA
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | INA | |
| Product Type | Plain Bearing | |
| Bore Diameter | 30mm | |
| Outside Diameter | 55mm | |
| Static Load Rating - Radial | 353kN | |
| Width | 32mm | |
| Standards/Approvals | No | |
| Series | GE | |
| Alles selecteren | ||
|---|---|---|
Merk INA | ||
Product Type Plain Bearing | ||
Bore Diameter 30mm | ||
Outside Diameter 55mm | ||
Static Load Rating - Radial 353kN | ||
Width 32mm | ||
Standards/Approvals No | ||
Series GE | ||
Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction
Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where:
A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where:
Shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where:
Vibrations and shocks must be supported
Damping of running noise is required
Gerelateerde Links
- INA GE30-PB 30 mm Bore Plain Bearing, 55 mm OD, 159 kN
- INA GE30-FO-2RS 30 mm Bore Plain Bearing, 55 mm OD, 357000 N
- INA GE35-DO-2RS 35 mm Bore Plain Bearing, 55 mm OD, 400 kN
- INA GE30-DO-2RS 30 mm Bore Plain Bearing, 47 mm OD, 271000 N
- INA GE30-UK-2RS-A 30 mm Bore Plain Bearing, 47 mm OD, 275000 N
- INA GE20-FW 20 mm Bore Plain Bearing, 42 mm OD, 128 kN
- INA GE40-FW-2RS-A 40 mm Bore Plain Bearing, 68 mm OD, 600000 N
- INA GE40-DO-2RS 40 mm Bore Plain Bearing, 62 mm OD, 496 kN