Stanley Pipe Bender For Use With Copper 6-10 mm
- RS-stocknr.:
- 562-037
- Fabrikantnummer:
- 0-70-451
- Fabrikant:
- Stanley
Subtotaal (1 eenheid)*
€ 30,14
(excl. BTW)
€ 36,47
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- 5 stuk(s) klaar voor verzending vanaf een andere locatie
- Plus verzending 18 stuk(s) vanaf 02 november 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 30,14 |
*prijsindicatie
- RS-stocknr.:
- 562-037
- Fabrikantnummer:
- 0-70-451
- Fabrikant:
- Stanley
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Stanley | |
| Product Type | Pipe Bender | |
| Pipe Material | Copper | |
| Overall Length | 338mm | |
| Compatible Pipe Diameter | 6-10 mm | |
| Bend Angle | 90° | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk Stanley | ||
Product Type Pipe Bender | ||
Pipe Material Copper | ||
Overall Length 338mm | ||
Compatible Pipe Diameter 6-10 mm | ||
Bend Angle 90° | ||
Standards/Approvals No | ||
Vrijgesteld
- Land van herkomst:
- TW
Stanley Pipe Bender, 338mm Overall Length, 90° Bend Angle - 0-70-451
This pipe bender is a hand tool designed to form accurate right-angle bends in copper tubing used in refrigeration and plumbing contexts. It is intended for manual operation on small-diameter copper lines, providing controlled deformation for tight 90° turns without kinking. The tool is compact and suited to on-site bending where space is limited.
Features and Benefits:
• Produces 90° bends for precise routing and alignment
• Accepts copper tubing sized 6-10mm for versatility
• Overall length 338mm for improved leverage in confined areas
• Manual operation enables tactile control during bending
• Compatible with copper material to preserve tube integrity
• Accepts copper tubing sized 6-10mm for versatility
• Overall length 338mm for improved leverage in confined areas
• Manual operation enables tactile control during bending
• Compatible with copper material to preserve tube integrity
Applications
• Suitable for refrigeration line bending in tight spaces
• Ideal for HVAC copper pipe installations on-site
• Used with small-diameter water service copper tubing
• Can be used for fabricating bends in appliance connections
• Ideal for HVAC copper pipe installations on-site
• Used with small-diameter water service copper tubing
• Can be used for fabricating bends in appliance connections
What range of tube diameters will it accommodate?
It works with copper tubing from 6mm up to 10mm diameter.
How steep a bend can be achieved with this tool?
The device is designed to form bends at a right angle, specifically 90°.
Is the tool intended for powered operation or manual use?
It is a manual hand-operated bender requiring user force to form bends.
What tube material is compatible for shaping without additional supports?
The tool is intended for use with copper tubes and matched to that material’s properties.
Gerelateerde Links
- Stanley Pipe Bender For Use With Copper 12 to 22 mm
- Gedore Pipe Bender For Use With Copper 8
- Virax Pipe Bender For Use With Annealed Copper
- Virax Pipe Bender For Use With Annealed Copper 10 mm
- Gedore Pipe Bender For Use With Copper 22 mm
- Virax Pipe Bender For Use With Annealed Copper 20 mm
- Virax Pipe Bender For Use With Annealed Copper 15 mm
- Virax Pipe Bender For Use With Annealed Copper 14 mm