Microchip , 1-Channel Ethernet Transceiver 48-Pin LQFP, KSZ8081MLXIA-TR
- RS-stocknr.:
- 235-4638P
- Fabrikantnummer:
- KSZ8081MLXIA-TR
- Fabrikant:
- Microchip
Subtotaal 5 eenheden (geleverd op een doorlopende strip)*
€ 7,58
(excl. BTW)
€ 9,17
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 945 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 5 + | € 1,516 |
*prijsindicatie
- RS-stocknr.:
- 235-4638P
- Fabrikantnummer:
- KSZ8081MLXIA-TR
- Fabrikant:
- Microchip
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Microchip | |
| Standard Supported | IEEE 802.3 | |
| Number of Channels per Chip | 1 | |
| Typical Data Rate | 100Mbps | |
| Integrated CDR | Yes | |
| Power Supply Type | Single | |
| Typical Operating Supply Voltage | 3.3 V | |
| Package Type | LQFP | |
| Pin Count | 48 | |
| Alles selecteren | ||
|---|---|---|
Merk Microchip | ||
Standard Supported IEEE 802.3 | ||
Number of Channels per Chip 1 | ||
Typical Data Rate 100Mbps | ||
Integrated CDR Yes | ||
Power Supply Type Single | ||
Typical Operating Supply Voltage 3.3 V | ||
Package Type LQFP | ||
Pin Count 48 | ||
The Microchip KSZ8081 series is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair cable. The KSZ8081 is a highly-integrated PHY solution. It reduces board cost and simplifies board layout by using on-chip termination resistors for the differential pairs and by integrating a low-noise regulator to supply the 1.2V core, and by offering 1.8/2.5/3.3V digital I/O interface support.
Single-chip 10BASE-T/100BASE-TX IEEE 802.3 compliant Ethernet transceiver
MII interface support
HBM ESD rating
Built-in 1.2V regulator for core
MII interface support
HBM ESD rating
Built-in 1.2V regulator for core
