Fabrikantnummer

Samtec SOLC Series Straight Surface PCB Socket, 40-Contact, 4 Row, 1.27 mm Pitch Solder

RS-stocknr.:: 767-9530P
Fabrikantnummer:: SOLC-110-02-S-Q
Fabrikant:: Samtec

Samtec SOLC Series Straight Surface PCB Socket, 40-Contact, 4 Row, 1.27 mm Pitch Solder

Subtotaal 1 eenheid (geleverd in een buis)*

€ 13,01

(excl. BTW)

€ 15,74

(incl. BTW)

Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw

Aantal stuks	Per stuk
1 +	€ 13,01

*prijsindicatie

RS-stocknr.:: 767-9530P
Fabrikantnummer:: SOLC-110-02-S-Q
Fabrikant:: Samtec

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Samtec
	Product Type	PCB Socket
	Number of Contacts	40
	Number of Rows	4
	Sub Type	Board-to-Board
	Current	2.5A
	Pitch	1.27mm
	Termination Type	Solder
	Housing Material	Liquid Crystal Polymer
	Mount Type	Surface
	Orientation	Straight
	Connector System	Board-to-Board
	Series	SOLC
	Row Pitch	1.27mm
	Minimum Operating Temperature	-55°C
	Contact Material	Bronze
	Contact Plating	Gold
	Maximum Operating Temperature	125°C
	Contact Gender	Female
	Standards/Approvals	No

	Alles selecteren
	Merk Samtec
	Product Type PCB Socket
	Number of Contacts 40
	Number of Rows 4
	Sub Type Board-to-Board
	Current 2.5A
	Pitch 1.27mm
	Termination Type Solder
	Housing Material Liquid Crystal Polymer
	Mount Type Surface
	Orientation Straight
	Connector System Board-to-Board
	Series SOLC
	Row Pitch 1.27mm
	Minimum Operating Temperature -55°C
	Contact Material Bronze
	Contact Plating Gold
	Maximum Operating Temperature 125°C
	Contact Gender Female
	Standards/Approvals No

Quad Row SMT Sockets - SOLC Series

The SOLC Series of FourRay SMT high density Sockets from samtec are a staggered quad row design. Contact and row pitch is 1.27 mm with a 0.635 mm offset in the contacts from row to row. This range of SOLC Series high density Sockets have 0.75 μm Gold plating on the contacts and 0.075 μm Gold plating on the tails. The above board height of these SOLC Series high density Sockets is 4.06 mm, with a mated height of 6.35 mm when using the corresponding TOLC high density terminal strips.

Note

For mating TOLC high density terminal strips see stock number 765-6354 typical.

Samtec SOLC Series Straight Surface PCB Socket, 40-Contact, 4 Row, 1.27 mm Pitch Solder

Quad Row SMT Sockets - SOLC Series

Note

Gerelateerde Links