Fabrikantnummer

HARTING SEK 19 Series Straight Through Hole PCB Header, 64 Contact(s), 2.54 mm Pitch, 2 Row, Shrouded

RS-stocknr.:: 923-0418
Fabrikantnummer:: 09195646914
Fabrikant:: HARTING

HARTING SEK 19 Series Straight Through Hole PCB Header, 64 Contact(s), 2.54 mm Pitch, 2 Row, Shrouded

Bulkkorting beschikbaar

Subtotaal (1 doos van 50 eenheden)*

€ 509,35

(excl. BTW)

€ 616,30

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 75,00

Tijdelijk niet op voorraad

Verzending vanaf 30 maart 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per Doos*
50 - 200	€ 10,187	€ 509,35
250 - 450	€ 8,832	€ 441,60
500 +	€ 8,302	€ 415,10

*prijsindicatie

RS-stocknr.:: 923-0418
Fabrikantnummer:: 09195646914
Fabrikant:: HARTING

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	HARTING
	Series	SEK 19
	Product Type	PCB Header
	Pitch	2.54mm
	Current	1A
	Number of Contacts	64
	Housing Material	Polycyclohexylenedimethylene Terephthalate
	Number of Rows	2
	Orientation	Straight
	Shrouded/Unshrouded	Shrouded
	Connector System	Wire-to-Board
	Mount Type	Through Hole
	Contact Plating	Gold
	Contact Material	Copper Alloy
	Termination Type	Solder
	Minimum Operating Temperature	-55°C
	Row Pitch	2.54mm
	Maximum Operating Temperature	125°C
	Contact Gender	Male
	Standards/Approvals	No
	Voltage	1000 V

	Alles selecteren
	Merk HARTING
	Series SEK 19
	Product Type PCB Header
	Pitch 2.54mm
	Current 1A
	Number of Contacts 64
	Housing Material Polycyclohexylenedimethylene Terephthalate
	Number of Rows 2
	Orientation Straight
	Shrouded/Unshrouded Shrouded
	Connector System Wire-to-Board
	Mount Type Through Hole
	Contact Plating Gold
	Contact Material Copper Alloy
	Termination Type Solder
	Minimum Operating Temperature -55°C
	Row Pitch 2.54mm
	Maximum Operating Temperature 125°C
	Contact Gender Male
	Standards/Approvals No
	Voltage 1000 V

Datasheet

Land van herkomst:: CH

High Temperature Headers

A range of the High Temperature Harting SEK SMC Board Connector Headers with short levers and a pin length of 2.9 mm.

The temperature range of these SEK SMC Headers is -55 to +125 °C with a maximum of 240 °C for 60 s during reflow soldering. The higher temperature limit includes the local ambient and heating effect of the contacts under load.

Performance level 2

PCB hole Ø 1± 0.1 mm

Note

Stock numbers 693-5693 and 426-4208 are the Angled solder pin versions.

Approvals

UL: E102079; CSA: 98267

Standards

IDC; BT224; DIN41651; DIN EN 60603-13