Molex Micro-Fit 3.0 Series Right Angle Through Hole PCB Header, 2 Contact(s), 3 mm Pitch, 1 Row, Shrouded

RS-stocknr.:: 670-4698
Fabrikantnummer:: 43650-0200
Fabrikant:: Molex

Molex Micro-Fit 3.0 Series Right Angle Through Hole PCB Header, 2 Contact(s), 3 mm Pitch, 1 Row, Shrouded

Bulkkorting beschikbaar

Subtotaal (1 verpakking van 5 eenheden)*

€ 6,47

(excl. BTW)

€ 7,83

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 75,00

Op voorraad

Plus verzending 200 stuk(s) vanaf 15 december 2025
Plus verzending 285 stuk(s) vanaf 15 december 2025

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per verpakking*
5 - 95	€ 1,294	€ 6,47
100 - 370	€ 0,884	€ 4,42
375 - 1495	€ 0,848	€ 4,24
1500 - 2995	€ 0,782	€ 3,91
3000 +	€ 0,75	€ 3,75

*prijsindicatie

RS-stocknr.:: 670-4698
Fabrikantnummer:: 43650-0200
Fabrikant:: Molex

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Molex
	Product Type	PCB Header
	Series	Micro-Fit 3.0
	Current	5A
	Pitch	3mm
	Housing Material	Thermoplastic
	Number of Contacts	2
	Number of Rows	1
	Orientation	Right Angle
	Shrouded/Unshrouded	Shrouded
	Mount Type	Through Hole
	Connector System	Wire-to-Board
	Contact Plating	Tin
	Contact Material	Brass
	Row Pitch	3mm
	Termination Type	Solder
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	105°C
	Contact Gender	Male
	Standards/Approvals	No
	Voltage	250 V
	Distrelec Product Id	304-42-700

	Alles selecteren
	Merk Molex
	Product Type PCB Header
	Series Micro-Fit 3.0
	Current 5A
	Pitch 3mm
	Housing Material Thermoplastic
	Number of Contacts 2
	Number of Rows 1
	Orientation Right Angle
	Shrouded/Unshrouded Shrouded
	Mount Type Through Hole
	Connector System Wire-to-Board
	Contact Plating Tin
	Contact Material Brass
	Row Pitch 3mm
	Termination Type Solder
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 105°C
	Contact Gender Male
	Standards/Approvals No
	Voltage 250 V
	Distrelec Product Id 304-42-700

Molex PCB Header, Black Colour, Right-Angle Body Orientation - Micro-Fit 3.0 Series - 43650-0200

Keen to connect your components in a flash? Choose this two-way PCB header from Molex to link accessories such as sensors, displays or communication devices to your board. A locking ramp ensures modules are attached securely and there's no risk of accidental detachment that could cause a glitch in your system. Flame-retardant liquid crystal polymer housing means this unit can handle extreme temperatures of up to +265°C during IR reflow soldering without breaking a sweat.

Features & Benefits

• Brass contacts resist corrosion and wear to deliver long-term service

• Plastic peg PCB locks make installation speedy

• 5A current rating ensures seamless compatibility with standard components

Applications

• Renewable energy generation

• Transportation systems

• Consumer electronics

How do I mount this header?

Installation is a matter of just slotting the header's pins through corresponding holes on your board and soldering them in place.

Molex Micro-Fit 3.0 3.0mm Single Row PCB Headers with Snap in Plastic Peg PCB Lock, 43650 Series

Micro-Fit 3.0 3mm pitch wire to board single row PCB headers which form part of a Compact power connector system providing a low to mid-range power distribution solution. With the Ability to carry up to 5A of current, Micro-Fit 3.0 connectors have one of the highest current carrying abilities in the smallest footprints available. These Micro-Fit 3.0 PCB headers incorporate positive latching in the form of a locking ramp on the housing for secure mating and to prevent accidental disconnection. The housings are MADE of high-temperature UL 94V-0 Liquid Crystal Polymer that can withstand temperatures of up to 265°C during the IR reflow soldering process. The through hole mounting versions of these Micro-Fit 3.0 headers are also SMT compatible which means a reduction in process requirements and costs. To secure these Micro-Fit 3.0 headers to the PCB board, snap-in plastic peg PCB locks are incorporated into the connector design. The contacts of these Micro-Fit 3.0 headers are fully isolated within the housings to reduce arcing. Tin or a choice of two thicknesses of gold contact platings are available to keep down costs

Features and Benefits

• High current carrying capacity in a small footprint

• High temperature housings for IR reflow soldering

• Through hole versions SMT compatible

• Positive latching for secure mating connection

• Fully isolated dual beam terminals for reliable electrical performance and contact

• Plastic peg PCB locks for secure connection to PCB

• Glow Wire Compliant

Product Application Information

These Micro-Fit 3.0 header connectors are suitable for use in a wide range of low to mid power applications including the following:

Military COTS (Commercial Off The Shelf)

Solar power

Consumer products (dryers, freezers, fridges, washing machines)

Data communications (routers, servers)

Medical

Telecommunications

Gaming terminals