JST NV Series Top Entry Through Hole PCB Header, 3 Contact(s), 5 mm Pitch, 1 Row, Shrouded
- RS-stocknr.:
- 185-6912
- Fabrikantnummer:
- B03P-NV (LF)(SN)
- Fabrikant:
- JST
Informatie over voorraden is momenteel niet toegankelijk
- RS-stocknr.:
- 185-6912
- Fabrikantnummer:
- B03P-NV (LF)(SN)
- Fabrikant:
- JST
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | JST | |
| Product Type | PCB Header | |
| Series | NV | |
| Pitch | 5mm | |
| Current | 10A | |
| Housing Material | Polyamide | |
| Number of Contacts | 3 | |
| Number of Rows | 1 | |
| Orientation | Top Entry | |
| Shrouded/Unshrouded | Shrouded | |
| Mount Type | Through Hole | |
| Connector System | Wire-to-Board | |
| Contact Material | Brass | |
| Termination Type | Solder | |
| Row Pitch | 5mm | |
| Minimum Operating Temperature | -25°C | |
| Tail Pin Length | 3.7mm | |
| Contact Gender | Male | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | No | |
| Mating Pin Length | 7.7mm | |
| Voltage | 250 V | |
| Alles selecteren | ||
|---|---|---|
Merk JST | ||
Product Type PCB Header | ||
Series NV | ||
Pitch 5mm | ||
Current 10A | ||
Housing Material Polyamide | ||
Number of Contacts 3 | ||
Number of Rows 1 | ||
Orientation Top Entry | ||
Shrouded/Unshrouded Shrouded | ||
Mount Type Through Hole | ||
Connector System Wire-to-Board | ||
Contact Material Brass | ||
Termination Type Solder | ||
Row Pitch 5mm | ||
Minimum Operating Temperature -25°C | ||
Tail Pin Length 3.7mm | ||
Contact Gender Male | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals No | ||
Mating Pin Length 7.7mm | ||
Voltage 250 V | ||
- Land van herkomst:
- JP
Suitable for a wide range of applications, from low-voltage, low-current signal circuits to power supply circuits requiring large currents. Compact connector (mounting height of 16.5mm) with a large capacity (10A). Side stackable. Connectors can be stacked side by side without causing pitch loss, and thus the number of circuits can easily be changed even after the design is finalized.
Side stackable
Connectors can be stacked side by side without causing pitch loss, and thus the number of circuits can easily be changed even after the design is finalized. This increases the engineer's freedom in designing printed circuit boards.
Box contact
This connector has been the box-shaped contact. The reliable NV connector can be used in a wide variety of applications, from low-voltage, low-current signal circuits to power supply circuits having a relatively large capacity.
Compact connector with a large capacity
Even though this connector has a large current carrying capacity (10A), it is compact, with a mounting height of 16.5mm (.650").
Secure contact and mounting
The housing has an arm lock mechanism which prevents the connector from working loose due to vibration. The mechanism also prevents mis insertion (misalignment or reverse insertion).
Gerelateerde Links
- JST NV Series Top Entry Through Hole PCB Header, 4 Contact(s), 5.0mm Pitch, 1 Row(s), Shrouded
- JST NV Series Top Entry Through Hole PCB Header, 2 Contact(s), 5.0mm Pitch, 1 Row(s), Shrouded
- JST VL Series Straight Through Hole PCB Header, 3 Contact(s), 6.2mm Pitch, 1 Row(s), Shrouded
- JST ZH Series Top Entry Through Hole PCB Header, 3 Contact(s), 1.5mm Pitch, 1 Row(s), Shrouded
- JST ZH Series Top Entry Through Hole PCB Header, 10 Contact(s), 1.5mm Pitch, 1 Row(s), Shrouded
- JST VH Series Top Entry Through Hole PCB Header, 9 Contact(s), 3.96mm Pitch, 1 Row(s), Shrouded
- JST VH Series Top Entry Through Hole PCB Header, 10 Contact(s), 3.96mm Pitch, 1 Row(s), Shrouded
- JST ZH Series Top Entry Through Hole PCB Header, 8 Contact(s), 1.5mm Pitch, 1 Row(s), Shrouded
