TE Connectivity 2481779-2 Series Vertical Surface PCB Header, 2 Contact(s), 1.5 mm Pitch, 1 Row, Shrouded

Bekijk alle PCB Headers
Bulkkorting beschikbaar

Subtotaal (1 rol van 5 eenheden)*

€ 6,00

(excl. BTW)

€ 7,26

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 2.520 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Rol(len)
Per rol
Per stuk*
1 - 4€ 6,00€ 1,20
5 - 9€ 5,52€ 1,104
10 +€ 4,98€ 0,996

*prijsindicatie

Verpakkingsopties
RS-stocknr.:
671-463
Fabrikantnummer:
2481779-2
Fabrikant:
TE Connectivity
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

TE Connectivity

Series

2481779-2

Product Type

PCB Header

Current

3A

Pitch

1.5mm

Housing Material

Liquid Crystal Polymer

Number of Contacts

2

Number of Rows

1

Orientation

Vertical

Shrouded/Unshrouded

Shrouded

Connector System

Wire-to-Board

Mount Type

Surface

Contact Material

Copper Alloy

Contact Plating

Tin over Nickel

Termination Type

Surface Mount

Row Pitch

1.5mm

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

125°C

Standards/Approvals

UL 94V-0

Voltage

50 V

Niet conform

Land van herkomst:
CN
The TE Connectivity Mini CT Low Profile Inverted Through Board Connectors provide a small form factor solution to bring power into a conventional or aluminium-clad printed circuit board from the underside of the board. This addresses the challenges of dressing wires on the TOP side of LED boards resulting in low profile, less obstructed PCB layout designs. The headers mate with 1.5 mm centreline AMP Mini CT cable assemblies. They facilitate a simpler assembly of solid state LED lighting for architectural, residential, and commercial applications. The connector is positioned through a cutout or notch in PCB and sits only 1.6mm above the board and surface mount hold downs provide stability during connector mating and unmating. The low profile form factor, combined with a rounded edge design allows for minimal shadowing in lighting applications.

Reduced shadowing in lighting applications

Low profile design of 1.6mm above the board

Mates with economical Mini CT plugs

High temperature material for reflow processing

Flat TOP surface allows for vacuum pick up

Tape and reel packaging for high speed SMT processing

RoHS compliant

Applications


Indoor and outdoor lighting fixtures

General LED illumination fixtures

LED lighting controls

Various non lighting applications that require wire dress connections below the PCB

Gerelateerde Links