Tektronix MDO3052, MDO3052 + MDO3SA Mixed Signal Oscilloscope, 500MHz, 2 Analogue. Ch.
- RS-stocknr.:
- 831-5426
- Fabrikantnummer:
- MDO3052 + MDO3SA
- Fabrikant:
- Tektronix
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
- RS-stocknr.:
- 831-5426
- Fabrikantnummer:
- MDO3052 + MDO3SA
- Fabrikant:
- Tektronix
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Tektronix | |
| Number of Analogue Channels | 2 | |
| Number of Digital Channels | 16 | |
| Bandwidth | 500MHz | |
| Series | MDO3000 | |
| Power Source | Mains | |
| Interface | CAN, IIC, LIN, RS232, RS422, RS485, SPI, UART, USB | |
| Display Type | Colour | |
| Minimum Vertical Sensitivity | 1mV/div | |
| Maximum Vertical Sensitivity | 10V/div | |
| Minimum Time Base | 1ns/div | |
| Screen Size | 229mm | |
| Sample Rate Random | 2.5 G samples/s | |
| Length | 147.4mm | |
| Record Length | 10M points/ch | |
| Input Impedance | 1 MΩ, 50 Ω, 75 Ω | |
| Height | 203.2mm | |
| Maximum Time Base | 1000s/div | |
| Vertical Resolution | 8 (11 bits with Hi Res) bit | |
| Dimensions | 147.4 x 416.6 x 203.2mm | |
| Weight | 4.2kg | |
| Safety Category Voltage | 300V | |
| Safety Category Level | CAT II | |
| Safety Category | CAT II 300 V | |
| Rise Time | 800ps | |
| Alles selecteren | ||
|---|---|---|
Merk Tektronix | ||
Number of Analogue Channels 2 | ||
Number of Digital Channels 16 | ||
Bandwidth 500MHz | ||
Series MDO3000 | ||
Power Source Mains | ||
Interface CAN, IIC, LIN, RS232, RS422, RS485, SPI, UART, USB | ||
Display Type Colour | ||
Minimum Vertical Sensitivity 1mV/div | ||
Maximum Vertical Sensitivity 10V/div | ||
Minimum Time Base 1ns/div | ||
Screen Size 229mm | ||
Sample Rate Random 2.5 G samples/s | ||
Length 147.4mm | ||
Record Length 10M points/ch | ||
Input Impedance 1 MΩ, 50 Ω, 75 Ω | ||
Height 203.2mm | ||
Maximum Time Base 1000s/div | ||
Vertical Resolution 8 (11 bits with Hi Res) bit | ||
Dimensions 147.4 x 416.6 x 203.2mm | ||
Weight 4.2kg | ||
Safety Category Voltage 300V | ||
Safety Category Level CAT II | ||
Safety Category CAT II 300 V | ||
Rise Time 800ps | ||
- Land van herkomst:
- CN
Tektronix Mixed Domain Oscilloscope MDO3000 Series with Spectrum Analyzer Module MDO3SA
MDO3000 oscilloscopes are multi-functional with integrated spectrum analyzer, Wave Inspector Navigation, MSO, serial and parallel bus triggering and analysis, and digital voltmeter. The scope's standard integral spectrum analyzer enables users to analyze RF signals up to the rated bandwidth of the scope. Module MDO3SA is a permanent upgrade which extends the spectrum analyzer frequency coverage to 3GHz.
Note
Probes recommended for use with MDO3000 Series oscilloscopes include: Passive - TPP0250 ( 797-3396 ), TPP0500B ( 797-3390 ), TPP0502 ( 734-5016 ), TPP0850 ( 734-5010 ), TPP1000 ( 728-6759 ); Active - TAP1500 ( 661-3286 ), TAP2500 ( 232-288 ) TAP3500 ( 668-7155 ); Differential - TDP0500 ( 661-3292 ), TDP1000 ( 668-7167 ), TDP1500 ( 668-7161 ), THDP0100 ( 752-7353 ), THDP0200 ( 752-7357 ), TMDP0200 ( 752-7366 ); Current - TCP0030A ( 781-0807 ), TCP0150 ( 661-3283 ).
Mixed Domain Oscilloscopes
Gerelateerde Links
- Tektronix MDO3022, MDO3022 + MDO3SA Mixed Signal Oscilloscope, 200MHz, 2 Analogue. Ch.
- Tektronix MDO4034, MDO4034C+MDO4SA3 Mixed Domain Oscilloscope, 350MHz, 4 Analogue. Ch., With RS Calibration
- Tektronix MDO4034, MDO4034C+MDO4SA3 Mixed Domain Oscilloscope, 350MHz, 4 Analogue. Ch., With UKAS Calibration
- Tektronix MDO3102 + MDO3SA MDO3000 Series, 1GHz Bench Oscilloscope, 2 Analogue Channels
- Tektronix MDO3034 + MDO3SA MDO3000 Series, 350MHz Bench Oscilloscope, 4 Analogue Channels
- Tektronix MDO3104 + MDO3SA MDO3000 Series, 1GHz Bench Oscilloscope, 4 Analogue Channels, 16 Digital Channels
- Tektronix P5100 Oscilloscope Probe, Logic Type, 500MHz, 100x
- Tektronix MDO3SA Analysis Module Oscilloscope Software for Use with MDO3000 Series