PicoScope 3000 Series, 200 MHz PC Based Oscilloscope 18-Channel

RS-stocknr.:: 818-2879
Artikelnummer Distrelec:: 300-08-271
Fabrikantnummer:: PicoScope 3206D MSO
Fabrikant:: Pico Technology

PicoScope 3000 Series, 200 MHz PC Based Oscilloscope 18-Channel

Bekijk alle Oscilloscopes

Momenteel niet beschikbaar

We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.

RS-stocknr.:: 818-2879
Artikelnummer Distrelec:: 300-08-271
Fabrikantnummer:: PicoScope 3206D MSO
Fabrikant:: Pico Technology

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Pico Technology
	Product Type	Oscilloscope
	Bandwidth	200MHz
	Number of Channels	18
	Model Number	PicoScope 3206D MSO
	Oscilloscope Type	PC Based
	Interface Type	CAN, IIC, LIN, RS232, SPI, UART, USB
	Series	PicoScope 3000
	Width	170mm
	Height	40mm
	Length	190mm
	Standards/Approvals	RoHS, WEEE
	Vertical Resolution	8 bit
	Maximum Time Base	5000s/div
	Power Source	USB
	Rise Time	1.75ns
	Minimum Time Base	500ps/div
	Maximum Vertical Sensitivity	4V/div
	Minimum Vertical Sensitivity	4mV/div

	Alles selecteren
	Merk Pico Technology
	Product Type Oscilloscope
	Bandwidth 200MHz
	Number of Channels 18
	Model Number PicoScope 3206D MSO
	Oscilloscope Type PC Based
	Interface Type CAN, IIC, LIN, RS232, SPI, UART, USB
	Series PicoScope 3000
	Width 170mm
	Height 40mm
	Length 190mm
	Standards/Approvals RoHS, WEEE
	Vertical Resolution 8 bit
	Maximum Time Base 5000s/div
	Power Source USB
	Rise Time 1.75ns
	Minimum Time Base 500ps/div
	Maximum Vertical Sensitivity 4V/div
	Minimum Vertical Sensitivity 4mV/div

Land van herkomst:: GB

PicoScope 3000 Series Oscilloscope, 200MHz Bandwidth, 500ps/div Time Base - PicoScope 3206D MSO

This oscilloscope is a PC-connected diagnostic instrument designed for signal visualisation and mixed-signal analysis in development and test environments. It operates from a USB supply and links to host software to display analogue and digital signals, accommodating a broad range of serial bus interfaces for system-level debugging.

Features and Benefits:

• 200MHz bandwidth delivers clear frequency-domain observation
• 500ps/div minimum time base captures fast transient events
• 1.75ns rise time enables accurate edge characterisation
• 8-bit vertical resolution supports consistent amplitude sampling
• 4mV/div minimum sensitivity reveals low-amplitude signals

Applications

• Suitable for automotive network bus debugging with CAN and LIN
• Ideal for embedded systems analysis using I2C and SPI
• Used with serial peripherals employing UART and RS232
• Can be used for mixed-signal verification across 18 channels
• Used for portable PC-based measurement where USB power is required

How many channels are available for mixed-signal capture?

It provides an 18-channel mixed-signal configuration allowing concurrent analogue and digital waveform acquisition.

Which physical interfaces can I expect to probe for protocol analysis?

The unit supports CAN, I2C, LIN, RS232, SPI and UART interfaces for direct protocol-level inspection.

What are the unit’s physical and supply characteristics?

The instrument measures 190 mm in length, 170 mm in width and 40 mm in height, and it is powered via USB.

How does its dynamic range aid signal measurement?

With an 8-bit vertical resolution and a minimum sensitivity of 4 mV/div the instrument resolves small amplitude variations while maintaining broad amplitude coverage.