PicoScope Automotive Series, 20 MHz PC Based PC Oscilloscope 4-Channel

This PC oscilloscope connects to a computer via USB to perform waveform acquisition and analysis in a software-driven environment. It is designed for multi-channel signal capture and long-duration monitoring, providing a Compact test solution that relies on host processing and display rather than an integrated front panel. The unit is suitable for laboratory, bench and field measurement tasks where flexible visualisation and data logging on a PC are required.

• 20MHz bandwidth for capturing mid-frequency signals and transients
• Four simultaneous input channels for multi-signal correlation
• 12-bit vertical resolution for improved amplitude discrimination
• 100ns/div minimum time base for fine temporal detail
• 5000s/div maximum time base for extended-duration logging

• Suitable for laboratory signal analysis and debugging
• Ideal for multi-channel transient and timing measurements
• Used with PCs for automated test and data capture
• Can be used for long-term monitoring of slow phenomena
• Used for educational demonstrations of waveform behaviour

It uses a USB Interface to transfer waveform data and control signals to the host PC.

There are four channels enabling concurrent observation of multiple signals.

The instrument provides a minimum vertical sensitivity setting of 10mV/div for low-amplitude signals.

Its 12-bit vertical resolution increases quantisation levels for finer amplitude resolution.

The time base can be extended up to 5000s/div to support very long-duration captures.