PicoScope 3000 Series, 50 MHz PC Based Oscilloscope 18-Channel, RSCAL

RS-stocknr.:: 280-6634
Fabrikantnummer:: PicoScope 3203D MSO
Fabrikant:: Pico Technology

PicoScope 3000 Series, 50 MHz PC Based Oscilloscope 18-Channel, RSCAL

Bekijk alle Oscilloscopes

Momenteel niet beschikbaar

Sorry, we weten niet wanneer dit weer voorradig zal zijn.

RS-stocknr.:: 280-6634
Fabrikantnummer:: PicoScope 3203D MSO
Fabrikant:: Pico Technology

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Pico Technology
	Product Type	Oscilloscope
	Bandwidth	50MHz
	Number of Channels	18
	Model Number	PicoScope 3203D MSO
	Oscilloscope Type	PC Based
	Interface Type	CAN, IIC, LIN, RS232, SPI, UART, USB
	Series	PicoScope 3000
	Length	190mm
	Standards/Approvals	EN 61010-1:2010, EN 61326-1:2006, WEEE
	Height	40mm
	Width	170mm
	Vertical Resolution	8 bit
	Minimum Time Base	1ns/div
	Rise Time	7ns
	Maximum Vertical Sensitivity	4V/div
	Power Source	USB
	Calibrated	RSCAL
	Maximum Time Base	5000s/div
	Minimum Vertical Sensitivity	4mV/div

	Alles selecteren
	Merk Pico Technology
	Product Type Oscilloscope
	Bandwidth 50MHz
	Number of Channels 18
	Model Number PicoScope 3203D MSO
	Oscilloscope Type PC Based
	Interface Type CAN, IIC, LIN, RS232, SPI, UART, USB
	Series PicoScope 3000
	Length 190mm
	Standards/Approvals EN 61010-1:2010, EN 61326-1:2006, WEEE
	Height 40mm
	Width 170mm
	Vertical Resolution 8 bit
	Minimum Time Base 1ns/div
	Rise Time 7ns
	Maximum Vertical Sensitivity 4V/div
	Power Source USB
	Calibrated RSCAL
	Maximum Time Base 5000s/div
	Minimum Vertical Sensitivity 4mV/div

Land van herkomst:: GB

PicoScope 3000 Series Oscilloscope, 50MHz Bandwidth, 8-bit Vertical Resolution - PicoScope 3203D MSO

This oscilloscope is a USB-powered, PC-based instrument designed for mixed-signal capture and analysis. It combines analogue and digital channel capability to observe fast transients and serial buses while relying on a host computer for display and control. The unit connects to a variety of serial interfaces and is intended for portable diagnostic and development tasks where compact, mains-free operation is required.

Features and Benefits:

• 50MHz Bandwidth delivers clear signal reproduction for mid‑frequency work
• 7ns Rise Time captures Rapid edge transitions for timing analysis
• 1ns/div Minimum Time Base enables fine time-resolution measurements
• 4mV/div Minimum Sensitivity detects low-amplitude signals during testing
• 8-bit Vertical Resolution provides consistent amplitude quantisation for analysis

Applications

• Suitable for debugging CAN, I2C and LIN serial networks
• Ideal for analysing SPI and UART digital communications
• Used with laptops for field service waveform inspection
• Can be used for mixed-signal verification in electronics development
• Suitable for portable measurement tasks requiring USB power

How many channels are available for mixed-signal capture?

It provides a total of 18 channels combining analogue and digital inputs to correlate signals across multiple lines.

Which interfaces can I monitor with this instrument?

The unit supports CAN, I2C, LIN, RS232, SPI, UART and USB serial protocols for bus-level capture.

What are the physical dimensions for transport and storage?

The enclosure measures 190mm in length, 170mm in width and 40mm in height.

How is the instrument powered during operation?

It draws power via the USB connection, eliminating the need for an external supply.

What standards and approvals are listed for the device?

It conforms to EN 61010-1:2010 and EN 61326-1:2006 and complies with WEEE.