PicoScope 6000E Series, 300 MHz PC Based Oscilloscope 4-Channel

This oscilloscope is a PC-based instrument that captures and displays electrical signals when connected via USB. It provides a balanced combination of temporal and amplitude performance for laboratory diagnostics and field analysis, powered through an AC adaptor and controlled from a host computer. The unit complies with applicable environmental standards and connects using a common Interface for data acquisition and analysis.

• 1ns/div time base for fine temporal resolution
• 1.3ns rise time enabling Rapid transient capture
• 2mV/div minimum sensitivity for small-signal measurement
• 8-bit vertical resolution for consistent amplitude sampling
• 4-channel configuration supporting multi-signal correlation

• Suitable for mixed-signal timing verification tasks
• Ideal for transient and Pulse response analysis
• Used with PC software for waveform recording and review
• Can be used for multi-channel sensor diagnostics
• Suitable for educational and research lab experiments

The instrument offers vertical sensitivity from 2mV/div up to 4V/div to accommodate both low-level signals and larger amplitudes.

It communicates over a USB connection and is powered using an AC adaptor to supply the necessary operating power.

The instrument measures 245mm in length, 192mm in width and 61.5mm in height, allowing desktop placement alongside a host PC.

It is produced in compliance with REACH, RoHS and WEEE standards.

It is a PC-based oscilloscope with an 8-bit vertical resolution suitable for general-purpose waveform analysis.