PicoScope 2000 Series, 50 MHz PC Based Oscilloscope 4-Channel, RSCAL

RS-stocknr.:: 111-7079
Artikelnummer Distrelec:: 304-46-628
Fabrikantnummer:: PicoScope 2406B
Fabrikant:: Pico Technology

PicoScope 2000 Series, 50 MHz PC Based Oscilloscope 4-Channel, RSCAL

Bekijk alle Oscilloscopes

Subtotaal (1 eenheid)*

€ 728,33

(excl. BTW)

€ 881,28

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Op voorraad

Plus verzending 10 stuk(s) vanaf 10 november 2026
Plus verzending 12 stuk(s) vanaf 11 november 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 728,33

*prijsindicatie

RS-stocknr.:: 111-7079
Artikelnummer Distrelec:: 304-46-628
Fabrikantnummer:: PicoScope 2406B
Fabrikant:: Pico Technology

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Pico Technology
	Product Type	Oscilloscope
	Bandwidth	50MHz
	Number of Channels	4
	Model Number	PicoScope 2406B
	Oscilloscope Type	PC Based
	Interface Type	CAN, IIC, LIN, RS232, SPI, UART, USB
	Series	PicoScope 2000
	Length	130mm
	Height	18.80mm
	Standards/Approvals	REACH, RoHS, WEEE
	Width	104mm
	Rise Time	7ns
	Vertical Resolution	8 bit
	Maximum Vertical Sensitivity	4V/div
	Maximum Time Base	5000s/div
	Minimum Vertical Sensitivity	4mV/div
	Minimum Time Base	1ns/div
	Calibrated	RSCAL
	Power Source	USB

	Alles selecteren
	Merk Pico Technology
	Product Type Oscilloscope
	Bandwidth 50MHz
	Number of Channels 4
	Model Number PicoScope 2406B
	Oscilloscope Type PC Based
	Interface Type CAN, IIC, LIN, RS232, SPI, UART, USB
	Series PicoScope 2000
	Length 130mm
	Height 18.80mm
	Standards/Approvals REACH, RoHS, WEEE
	Width 104mm
	Rise Time 7ns
	Vertical Resolution 8 bit
	Maximum Vertical Sensitivity 4V/div
	Maximum Time Base 5000s/div
	Minimum Vertical Sensitivity 4mV/div
	Minimum Time Base 1ns/div
	Calibrated RSCAL
	Power Source USB

Land van herkomst:: GB

PicoScope 2000 Series Oscilloscope, 50MHz Bandwidth, 4 Channels - PicoScope 2406B

This oscilloscope is a Compact PC-based instrument designed for signal capture and analysis via a USB connection. It provides mixed-protocol interfacing for serial buses and is intended for bench or field tasks where a portable, computer-driven scope is required. The unit operates from USB power and integrates with standard laboratory workflows to record, visualise and troubleshoot electronic signals.

Features and Benefits:

• 50MHz bandwidth delivers clear signal frequency content
• 7ns rise time captures fast edge transitions
• 8-bit vertical resolution preserves amplitude detail
• 4mV/div sensitivity allows measurement of small signals
• 1ns/div time base supports high-temporal-resolution sampling

Applications

• Suitable for automotive serial-bus diagnostics with CAN and LIN
• Ideal for embedded I2C and SPI protocol development
• Used for RS232 and UART signal validation during testing
• Can be used for USB‑powered portable waveform recording
• Suitable for laboratory waveform analysis on PC platforms

How is the instrument powered during use?

It draws power through the USB connection so no external supply is required.

Which physical interfaces are available for device communication?

The unit provides CAN, I2C, LIN, RS232, SPI, UART and USB interfaces for direct protocol capture.

What form factor should I expect for fitting into tight workspaces?

The device has a Compact footprint measuring 130mm x 104mm x 18.8mm for constrained benches.

What resolution and timing range are available for measurements?

Vertical resolution is 8-bit and time-base settings span from 1ns/div up to 5000s/div.