PicoScope 2000 Series, 100 MHz PC Based Oscilloscope 2-Channel, UKAS

RS-stocknr.:: 111-7066
Fabrikantnummer:: PicoScope 2208B
Fabrikant:: Pico Technology

PicoScope 2000 Series, 100 MHz PC Based Oscilloscope 2-Channel, UKAS

Bekijk alle Oscilloscopes

Subtotaal (1 eenheid)*

€ 874,11

(excl. BTW)

€ 1.057,67

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Op voorraad

Plus verzending 10 stuk(s) vanaf 10 november 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 874,11

*prijsindicatie

RS-stocknr.:: 111-7066
Fabrikantnummer:: PicoScope 2208B
Fabrikant:: Pico Technology

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Pico Technology
	Product Type	Oscilloscope
	Bandwidth	100MHz
	Number of Channels	2
	Model Number	PicoScope 2208B
	Oscilloscope Type	PC Based
	Interface Type	CAN, IIC, LIN, RS232, SPI, UART, USB
	Series	PicoScope 2000
	Length	130mm
	Height	18.80mm
	Width	104mm
	Standards/Approvals	REACH, RoHS, WEEE
	Vertical Resolution	8 bit
	Power Source	USB
	Rise Time	3.5ns
	Minimum Vertical Sensitivity	4mV/div
	Maximum Vertical Sensitivity	4V/div
	Calibrated	UKAS
	Maximum Time Base	5000s/div
	Minimum Time Base	1ns/div

	Alles selecteren
	Merk Pico Technology
	Product Type Oscilloscope
	Bandwidth 100MHz
	Number of Channels 2
	Model Number PicoScope 2208B
	Oscilloscope Type PC Based
	Interface Type CAN, IIC, LIN, RS232, SPI, UART, USB
	Series PicoScope 2000
	Length 130mm
	Height 18.80mm
	Width 104mm
	Standards/Approvals REACH, RoHS, WEEE
	Vertical Resolution 8 bit
	Power Source USB
	Rise Time 3.5ns
	Minimum Vertical Sensitivity 4mV/div
	Maximum Vertical Sensitivity 4V/div
	Calibrated UKAS
	Maximum Time Base 5000s/div
	Minimum Time Base 1ns/div

Land van herkomst:: GB

PicoScope 2000 Series Oscilloscope, 100MHz Bandwidth, 2 Channels - PicoScope 2208B

This oscilloscope is a Compact PC-connected instrument designed for waveform capture and analysis via a USB power interface. It provides time-domain measurements with a fast minimum timebase and moderate vertical resolution, suitable for engineers and technicians who require portable signal inspection. Multiple serial bus interfaces enable direct decoding of common vehicle and embedded communication standards for troubleshooting and verification tasks.

Features and Benefits:

• 100MHz bandwidth improves frequency capture and signal fidelity
• 1ns/div minimum timebase enables fine timing measurements
• 3.5ns rise time supports detection of fast edges
• 8-bit vertical resolution balances detail and data throughput
• 4mV/div sensitivity reveals low-amplitude signal detail

Applications

• Suitable for automotive network diagnostics using CAN and LIN
• Ideal for embedded system validation with I2C and SPI buses
• Used with serial device testing over UART and RS232
• Can be used for portable field measurements via USB power
• Used for education and laboratory work requiring PC-based analysis

How is the unit powered during field use?

It draws power directly from a USB connection enabling operation without an external mains supply.

Which serial buses can be analysed for protocol decoding?

It supports CAN, I2C, LIN, SPI, UART and RS232 interfaces for direct bus-level inspection.

What is the maximum selectable time division for long-duration captures?

The scope offers a maximum timebase of 5000s/div for extended observation intervals.

What are the physical dimensions for portability considerations?

The instrument measures 130mm in length, 104mm in width and 18.80mm in height.