Tektronix TPP Series TPP0201 Oscilloscope Probe, Passive, Voltage Type, 200MHz, 10x, BNC Connector

RS-stocknr.:: 715-8737
Fabrikantnummer:: TPP0201
Fabrikant:: Tektronix

Tektronix TPP Series TPP0201 Oscilloscope Probe, Passive, Voltage Type, 200MHz, 10x, BNC Connector

Niet beschikbaar

RS heeft dit product niet meer op voorraad.

Alternatief

Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.

Tektronix TPP Series TPP0201 Oscilloscope Probe, Voltage Type, 200MHz, 1:10, BNC Connector

RS-stocknr.: 726-0041

la pièce

111,10 €

(excl. BTW)

134,43 €

(incl. BTW)

RS-stocknr.:: 715-8737
Fabrikantnummer:: TPP0201
Fabrikant:: Tektronix

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Tektronix
	Probe Type	Passive, Voltage
	Attenuation	10x
	Bandwidth	200MHz
	Maximum Common Mode Input Voltage	300V
	Connector Type	BNC
	Model Number p	TPP0201
	Safety Category Level	CAT I, CAT II
	Safety Category Voltage	300 V, 300 V ac, 400 V ac
	Series	TPP
	Safety Category	CAT I 400 V ac, CAT II 300 V, CAT II 300 V ac
	Rise Time	2.3ns

	Alles selecteren
	Merk Tektronix
	Probe Type Passive, Voltage
	Attenuation 10x
	Bandwidth 200MHz
	Maximum Common Mode Input Voltage 300V
	Connector Type BNC
	Model Number p TPP0201
	Safety Category Level CAT I, CAT II
	Safety Category Voltage 300 V, 300 V ac, 400 V ac
	Series TPP
	Safety Category CAT I 400 V ac, CAT II 300 V, CAT II 300 V ac
	Rise Time 2.3ns

Vrijgesteld

Tektronix Oscilloscope Probes

The Tektronix passive voltage oscilloscope probe is for use on BNC oscilloscopes with 1Mohm/13pF input. It has an attenuation of 10X with 10Mohm input resistance.
Supplied with:
Retractable hook tip
Ground spring
Ground lead with alligator clip
Note:
All the products in this range are supplied for use with instruments with a permanent earth connection.

Features and Benefits

Bandwidth is DC to 200MHz
Attenuation ratio is 1:10
Input impedance is 10Mohmll12pF
Length is 1.3m
Maximum common-mode input voltage is 300KV
Maximum Input voltage is 300 VRMS CAT II
Wide compensation ranges between 15pF and 25pF)

Applications

Relative low frequency measurements
Low frequency computer and telecom measurements
Power supplies
Low frequency amplifiers

Certifications

UL61010-031 approved
2007, CAN/CSA C22.2 No. 61010-031-07 certified
IEC61010-031
IEC 61010-031/A1:2008
CAT I 400 VAC
CAT II 300 V
CAT II 300 VAC