Teledyne LeCroy ZS Series ZS1000 Oscilloscope Probe, Voltage Type, 1GHz, 1:10, ProBus Connector

Afbeelding representeert productcategorie

Bekijk alle Oscilloscope Probes

Subtotaal (1 eenheid)*

€ 1.782,65

(excl. BTW)

€ 2.157,01

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 7 stuk(s) klaar voor verzending
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 1.782,65

*prijsindicatie

RS-stocknr.:
672-1706
Artikelnummer Distrelec:
176-25-945
Fabrikantnummer:
ZS1000
Fabrikant:
Teledyne LeCroy
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Teledyne LeCroy

Probe Type

Voltage

Attenuation

1:10

Bandwidth

1GHz

Connector Type

ProBus

Model Number p

ZS1000

Series

ZS

N.v.t.

Land van herkomst:
DE

Teledyne LeCroy ZS Series High Impedance Active Probes


The Teledyne LeCroy ZS Series of easy-to-use probes provide high impedance along with an extensive set of probe tips and ground accessories to handle wide-ranging probing scenarios. The high 1 MΩ input resistance and low 0.9 pF (0.6 pF with ZS4000) input capacitance means these probes are excellent for all frequencies.

The ZS Series probes provide full system bandwidth with all Teledyne LeCroy oscilloscopes featuring bandwidths of 4 GHz and lower. Small form combines with an extensive standard range of tip accessories to facilitate use in challenging situations as well as in probing test points spaced apart.

Features and Benefits


  • High signal fidelity to 4 GHz bandwidth

  • Low circuit loading – high input impedance and low capacitance

  • Choice of 4 GHz, 2.5 GHz and 1 GHz models

  • 1 MΩ input resistance

  • 0.6 pF (4 GHz) and 0.9 pF input capacitance

  • ± 8 V input dynamic range, ± 12 V offset range

  • Integrated with oscilloscope (ProBus interface for control from oscilloscope front panel)

  • Wide variety of tips and grounds included

Applications


  • Automotive

  • Power applications

  • Motor drive development

  • Product design applications

Note

The ZS1000 is ideal for 200 → 600 MHz oscilloscopes

Supplied with

Square pin adapter, IC tip, bent tip, channel ID clips (set of 4 colours), copper tape pad (x2), freehand probe holder, ground blade (narrow), ground blade (wide), micro-grabber (pair), offset ground-Z lead, pogo ground lead, pogo tip, probe tip - standard (x3), right angle lead (long), right angle lead (short), right angle socket, straight pin lead (long), straight pin lead (short), Y-lead adapter

Gerelateerde Links