Tektronix TDP Series TDP1500 Oscilloscope Probe, Differential Type, 1.5GHz, 1:1, 1:10

Afbeelding representeert productcategorie

Bekijk alle Oscilloscope Probes

Subtotaal (1 eenheid)*

€ 7.756,80

(excl. BTW)

€ 9.385,73

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 2 stuk(s) klaar voor verzending
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 7.756,80

*prijsindicatie

RS-stocknr.:
668-7161
Artikelnummer Distrelec:
110-93-790
Fabrikantnummer:
TDP1500
Fabrikant:
Tektronix
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Tektronix

Probe Type

Differential

Attenuation

1:1, 1:10

Bandwidth

1.5GHz

Maximum Common Mode Input Voltage

25V

Model Number p

TDP1500

Series

TDP

Rise Time

265ps

N.v.t.

Land van herkomst:
US

Tektronix TDP1500 Differential Probes with TekVPI Interface


The Tektronix differential active oscilloscope probe offers truer signal reproduction and fidelity for high-frequency measurements. With ultra-low input capacitance and the versatile device under test connection capabilities, it has excellent high-speed electrical and mechanical performance required for today’s digital system designs. It is specifically designed for use and direct connection to the probe interface used on the DPO7000, DPO4000 and MSO4000 series oscilloscopes.

Features and Benefits


Bandwidth is DC to 1.5 GHz

Attenuation ratio is 1:10, 1:1

Input impedance is 200Kohmll1pF

Rise time is 265ps

Attenuation ratio is 1:10

Input impedance is 200Kohmll1pF

Rise time is 265ps

Maximum common mode input voltage is ±7V

Non-destructive Max input voltage is ±25V (DC+pkAC)

Wide compensation range is (15pF-25pF)

CMRR (typical) is >60dB at 1MHz, > 25dB @ 1GHz

Excellent common mode rejection - reduces measurement errors in higher common environments

Low capacitive and resistive Loading - maintains signal fidelity and reduces DC biasing interactions

DUT attachment accessories enable connection to fine spaced SMDs

Set-up and control from probe comp box or oscilloscope user interface

AutoZero - zeros out output offset

Remote GPIB/USB probe control through the oscilloscope (requires TEKUSB-488 Adapter for GPIB control on DPO4000 and MSO4000)
Cable length 1200mm

Applications


The TDP1500 has been designed for use with oscilloscopes with the TekVPI probe interface. These differential probes can be used for design, validation, debugging and characterisation of common high-speed serial bus designs including I2C, CAN/LIN, SPI, Serial ATA, Ethernet (GbE), USB 2.0, FireWire (1394b)

Signal integrity
Jitter and timing analysis
Manufacturing engineering and test

Supplied with

Nylon carrying case
Plastic accessory box
Straight pins
Longhorn VIA adaptor
1-inch and 3-inch solder down
Y lead adapter
MicroCKT test tip
Tip saver
3-inch ground lead
Marker band set

Gerelateerde Links