Fluke 116 Handheld Digital Multimeter, True RMS, 600μA ac Max, 600μA dc Max, 600V ac Max
- RS-stocknr.:
- 616-1476
- Fabrikantnummer:
- FLUKE-116 EUR
- Fabrikant:
- Fluke
Subtotaal (1 eenheid)*
€ 341,38
(excl. BTW)
€ 413,07
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Beperkte voorraad
- 11 resterend, klaar voor verzending
- 25 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 341,38 |
*prijsindicatie
Kalibratie-opties
- Calibration Type:
- UKAS
- RS-stocknr.
- 625-0576
la pièce
433,38 €
(excl. BTW)
524,39 €
(incl. BTW)
- RS-stocknr.:
- 616-1476
- Fabrikantnummer:
- FLUKE-116 EUR
- Fabrikant:
- Fluke
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Fluke | |
| Multimeter Type | Handheld | |
| Model Number p | 116 | |
| Display Type | Digital | |
| Functions Measured | AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode, Frequency, Resistance, Temperature | |
| Absolute Maximum DC Voltage Measurement | 600V dc | |
| Absolute Maximum DC Current Measurement | 600µA dc | |
| Absolute Maximum AC Voltage Measurement | 600V ac | |
| Absolute Maximum AC Current Measurement | 600µA ac | |
| Absolute Maximum Resistance Measurement | 40MΩ | |
| Absolute Maximum Capacitance Measurement | 9.999F | |
| True RMS | Yes | |
| Absolute Maximum Temperature Measurement | +400°C | |
| Maximum Frequency | 1kHz | |
| DC Current Measurement Resolution | 0.1µA dc | |
| AC Current Measurement Resolution | 0.1µA ac | |
| AC Voltage Measurement Resolution | 0.1mV ac | |
| DC Voltage Measurement Resolution | 0.1mV dc | |
| Resistance Measurement Resolution | 100mΩ | |
| Application | HVAC | |
| Capacitance Measurement Resolution | 1nF | |
| Temperature Measurement Resolution | 0.1°C | |
| Safety Category Level | CAT III | |
| Safety Category Voltage | 600V | |
| Battery Type | 9V | |
| Best Resistance Measurement Accuracy | ±1.5% + 2 Digits | |
| Minimum Operating Temperature | -10°C | |
| Height | 167mm | |
| Weight | 550g | |
| Best DC Current Accuracy | ±1% + 2 Digits | |
| Best DC Voltage Accuracy | ±0.5% + 2 Digits | |
| Length | 46mm | |
| Maximum Operating Temperature | +50°C | |
| Best Temperature Measurement Accuracy | ±1% + 1 °C | |
| Dimensions | 46 x 84 x 167mm | |
| Best AC Voltage Accuracy | ±1% + 3 Digits | |
| Best Capacitance Measurement Accuracy | ±1.9% + 2 Digits | |
| Best AC Current Accuracy | ±1.5% + 3 Digits | |
| Width | 84mm | |
| Alles selecteren | ||
|---|---|---|
Merk Fluke | ||
Multimeter Type Handheld | ||
Model Number p 116 | ||
Display Type Digital | ||
Functions Measured AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode, Frequency, Resistance, Temperature | ||
Absolute Maximum DC Voltage Measurement 600V dc | ||
Absolute Maximum DC Current Measurement 600µA dc | ||
Absolute Maximum AC Voltage Measurement 600V ac | ||
Absolute Maximum AC Current Measurement 600µA ac | ||
Absolute Maximum Resistance Measurement 40MΩ | ||
Absolute Maximum Capacitance Measurement 9.999F | ||
True RMS Yes | ||
Absolute Maximum Temperature Measurement +400°C | ||
Maximum Frequency 1kHz | ||
DC Current Measurement Resolution 0.1µA dc | ||
AC Current Measurement Resolution 0.1µA ac | ||
AC Voltage Measurement Resolution 0.1mV ac | ||
DC Voltage Measurement Resolution 0.1mV dc | ||
Resistance Measurement Resolution 100mΩ | ||
Application HVAC | ||
Capacitance Measurement Resolution 1nF | ||
Temperature Measurement Resolution 0.1°C | ||
Safety Category Level CAT III | ||
Safety Category Voltage 600V | ||
Battery Type 9V | ||
Best Resistance Measurement Accuracy ±1.5% + 2 Digits | ||
Minimum Operating Temperature -10°C | ||
Height 167mm | ||
Weight 550g | ||
Best DC Current Accuracy ±1% + 2 Digits | ||
Best DC Voltage Accuracy ±0.5% + 2 Digits | ||
Length 46mm | ||
Maximum Operating Temperature +50°C | ||
Best Temperature Measurement Accuracy ±1% + 1 °C | ||
Dimensions 46 x 84 x 167mm | ||
Best AC Voltage Accuracy ±1% + 3 Digits | ||
Best Capacitance Measurement Accuracy ±1.9% + 2 Digits | ||
Best AC Current Accuracy ±1.5% + 3 Digits | ||
Width 84mm | ||
Vrijgesteld
Fluke 16 True RMS HVAC Digital Multimeter with Built-In Thermometer
The Fluke 16 Digital Multimeter is designed to function like a standard Multimeter and exclusive HVAC modes, unlike other models in the Fluke 10 series, the Fluke 116 comes with a built-in thermometer, allowing engineers to measure temperature and microamp mode for testing flame sensors to quickly troubleshoot problems for HVAC applications. The Fluke 116 measures resistance, continuity, frequency and capacitance. The Fluke 116 Multimeter are independently tested for safe use in CAT III 600 V Environments.
Why buy the Fluke 116 Digital Multimeter?
• VoltAlertTM Technology for intergrated non-contact voltage detection
• AutoVolt feature for automatic AC/DC voltage selection
• LoZ: Low input impedance to eliminate stray voltage ensures that ghost voltages don’t have an effect on readings
• Large white LED backlight, perfect for when you’re working in darkened areas
• True RMS meanng it will maintain its accuracy when testing on irregular AC connections
• Min/Max/Average to record signal fluctuations
• Current measurement 20A (30 seconds momentary; 10A continuous)
• Resistance , continuity, frequency and capacitance testing capability
• AutoVolt feature for automatic AC/DC voltage selection
• LoZ: Low input impedance to eliminate stray voltage ensures that ghost voltages don’t have an effect on readings
• Large white LED backlight, perfect for when you’re working in darkened areas
• True RMS meanng it will maintain its accuracy when testing on irregular AC connections
• Min/Max/Average to record signal fluctuations
• Current measurement 20A (30 seconds momentary; 10A continuous)
• Resistance , continuity, frequency and capacitance testing capability
Fluke 116 HVAC Digital Multimeter key benefits?
• Compact, Ergonomic design and can be used with one hand
• Built-in thermometer allows Temperature measurement from -40°C to +400°C using the Type K thermocouple input adaptor
• Capacitance up to 10000μF to test motor start and run capacitors
• Microamp current range for flame sensor measurement down to μA
• 4000 count auto ranging Multimeter
• 40MΩ resistance range
• 33 segment analogue bargrapgh on display
• Diode test
• Continuity test
• V-Check™ mode for safety. Automatically switches from ohm/continuity mode to measure ac or dc volts when voltages above 4.5V are present at the input
• Min/Max recording with elapsed time (ideal for recording signal fluctuations)
• Continuity capture symbolically displays open and short circuits as brief as 250μs
• Meets IEC1010-1 (safety standard) CAT III 600V
• Replacement type K thermocouple available separately accepts other type K thermocouple sensors with subminiature connectors (see accessories)
• Built-in thermometer allows Temperature measurement from -40°C to +400°C using the Type K thermocouple input adaptor
• Capacitance up to 10000μF to test motor start and run capacitors
• Microamp current range for flame sensor measurement down to μA
• 4000 count auto ranging Multimeter
• 40MΩ resistance range
• 33 segment analogue bargrapgh on display
• Diode test
• Continuity test
• V-Check™ mode for safety. Automatically switches from ohm/continuity mode to measure ac or dc volts when voltages above 4.5V are present at the input
• Min/Max recording with elapsed time (ideal for recording signal fluctuations)
• Continuity capture symbolically displays open and short circuits as brief as 250μs
• Meets IEC1010-1 (safety standard) CAT III 600V
• Replacement type K thermocouple available separately accepts other type K thermocouple sensors with subminiature connectors (see accessories)
What are the typical Applications for the Fluke 116 Digital Multimeter?
The Fluke 116 model is built for engineers who work in the HVAC environment (heating, ventilation and air conditioning)
Additional Specification
• DC Voltage Accuracy: 0.5% +2d
• AC Voltage Accuracy: 2.0% +3d
• DC Current Accuracy 1.0% +2d
• AC Current Accuracy 1.5% +3d
• Resistance Accuracy: 1.5% +2d
• Diode Test Range: 2.000V
• Diode Test Resolution: 0.001V
• Diode Test Accuracy: 0.9% +2d
• Capacitance Accuracy: 1.9% +2d
• Temperature Resolution 0.1C
• Temperature Accuracy 1% +10d
• Display Count 6000
• Display Update 4/sec
• Bar Graph Segments 33
• Bar Graph Update 32/sec
• Please note accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, with relative humidity at 0 % to 95 %."
• AC Voltage Accuracy: 2.0% +3d
• DC Current Accuracy 1.0% +2d
• AC Current Accuracy 1.5% +3d
• Resistance Accuracy: 1.5% +2d
• Diode Test Range: 2.000V
• Diode Test Resolution: 0.001V
• Diode Test Accuracy: 0.9% +2d
• Capacitance Accuracy: 1.9% +2d
• Temperature Resolution 0.1C
• Temperature Accuracy 1% +10d
• Display Count 6000
• Display Update 4/sec
• Bar Graph Segments 33
• Bar Graph Update 32/sec
• Please note accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, with relative humidity at 0 % to 95 %."
Does the Fluke 116 come with a warranty?
The Fluke 116 comes with a 3 year warranty giving engineers the peace of mind
Standards
From Fluke, the 116 is designed for heating, ventilation and air conditioning (HVAC) engineers. The model includes temperature measurement and microamp current ranges to quickly troubleshoot HVAC problems.
Contents
TL75 Test Leads, 80BK Integrated Temperature Probe, holster, user’s manual and 9V battery (installed)
FLUKE Multimeter, Built-in Thermometer, LCD Display - FLUKE-116 EUR
Pinpoint problems in heating, ventilation and air-conditioning systems with this multimeter from FLUKE. It has modes including resistance, capacitance and continuity, so you can get all of your testing done using just one device. It records minimum, maximum and average readings to spot signal fluctuations. The Auto-V setting automatically detects the voltage type to speed things up, while the LoZ function prevents ghost voltages from messing up your measurements. A built-in thermometer helps you take readings from heating and cooling devices, to check they're doing their jobs. Fitted with a type K thermocouple, this precision unit is capable of measuring temperatures between -40°C and +400°C with an accuracy of ±1%.
Features & Benefits
• Large digits and a backlight means poor light won't stop you from working
• Battery-powered, so there's no need to find an electric socket
• Safety rated up to 600V, to work with high voltages in distribution circuits
• Ergonomic design for comfortable handling
• Integral stand props it up on benches
• Battery-powered, so there's no need to find an electric socket
• Safety rated up to 600V, to work with high voltages in distribution circuits
• Ergonomic design for comfortable handling
• Integral stand props it up on benches
Applications
• Building maintenance
• Industrial heaters and driers
• Ducts and vents
• Industrial heaters and driers
• Ducts and vents
Can I use this multimeter to test flame sensors?
Yes, this multimeter has microamps to let you test flame sensors on domestic boilers as well as industrial heaters and driers.
Gerelateerde Links
- Fluke 116 Handheld Digital Multimeter, True RMS, 600μA ac Max, 600μA dc Max, 600V ac Max - RS Calibrated
- Fluke 116 Handheld Digital Multimeter, True RMS, 600μA ac Max, 600μA dc Max, 600V ac Max - UKAS Calibrated
- Fluke 113 Handheld Digital Multimeter, True RMS, 600V ac Max
- Fluke Fluke 279 FC Handheld Digital Multimeter, True RMS, 2.5kA ac Max, 1000V ac Max
- Fluke 115 Handheld Digital Multimeter, True RMS, 10A ac Max, 10A dc Max, 600V ac Max
- Fluke 179 Handheld Digital Multimeter, True RMS, 10A ac Max, 10A dc Max, 1000V ac Max
- Fluke 83 Handheld Digital Multimeter, True RMS, 10A ac Max, 10A dc Max, 1000V ac Max
- Fluke 175 Handheld Digital Multimeter, True RMS, 10A ac Max, 10A dc Max, 1000V ac Max