RS PRO IDM93N Handheld Digital Multimeter, 10A ac Max, 10A dc Max, 600V ac Max
- RS-stocknr.:
- 123-3245
- Artikelnummer Distrelec:
- 304-05-204
- Fabrikant:
- RS PRO
Subtotaal (1 eenheid)*
€ 149,70
(excl. BTW)
€ 181,14
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 310 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 149,70 |
*prijsindicatie
- RS-stocknr.:
- 123-3245
- Artikelnummer Distrelec:
- 304-05-204
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Multimeter Type | Handheld | |
| Display Type | Digital | |
| Model Number p | IDM93N | |
| Functions Measured | AC Current, AC Voltage, Capacitance, Conductance, DC Current, DC Voltage, Diode, Frequency, Resistance, RMS, Temperature | |
| Absolute Maximum AC Current Measurement | 10A ac | |
| Absolute Maximum DC Current Measurement | 10A dc | |
| Absolute Maximum Resistance Measurement | 20MΩ | |
| Absolute Maximum DC Voltage Measurement | 300V dc | |
| Absolute Maximum AC Voltage Measurement | 600V ac | |
| True RMS | No | |
| Absolute Maximum Capacitance Measurement | 200µF | |
| Maximum Frequency | 200kHz | |
| AC Current Measurement Resolution | 0.1µA ac | |
| DC Current Measurement Resolution | 0.1µA dc | |
| Resistance Measurement Resolution | 100mΩ | |
| AC Voltage Measurement Resolution | 0.1mV ac | |
| DC Voltage Measurement Resolution | 0.1mV dc | |
| Capacitance Measurement Resolution | 1pF | |
| Safety Category Level | CAT II | |
| Best DC Current Accuracy | ±1% + 1 Digits | |
| Height | 192mm | |
| Weight | 550 (With Holster)g | |
| Safety Category Voltage | 600V | |
| Battery Type | 9V, AAA 1.5V x 2, AM4, IEC LR03, IEC6F22, NEDA 1604 | |
| Maximum Operating Temperature | +50°C | |
| Best Resistance Measurement Accuracy | ±0.8% + 1 Digits | |
| Minimum Operating Temperature | 0°C | |
| Best AC Current Accuracy | ±2.5% + 3 Digits | |
| Width | 50mm | |
| Best DC Voltage Accuracy | ±0.5% + 1 Digits | |
| Dimensions | 95 x 50 x 192mm | |
| Best Capacitance Measurement Accuracy | ±2% + 4 Digits | |
| Length | 95mm | |
| Best AC Voltage Accuracy | ±1.3% + 4 Digits | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Multimeter Type Handheld | ||
Display Type Digital | ||
Model Number p IDM93N | ||
Functions Measured AC Current, AC Voltage, Capacitance, Conductance, DC Current, DC Voltage, Diode, Frequency, Resistance, RMS, Temperature | ||
Absolute Maximum AC Current Measurement 10A ac | ||
Absolute Maximum DC Current Measurement 10A dc | ||
Absolute Maximum Resistance Measurement 20MΩ | ||
Absolute Maximum DC Voltage Measurement 300V dc | ||
Absolute Maximum AC Voltage Measurement 600V ac | ||
True RMS No | ||
Absolute Maximum Capacitance Measurement 200µF | ||
Maximum Frequency 200kHz | ||
AC Current Measurement Resolution 0.1µA ac | ||
DC Current Measurement Resolution 0.1µA dc | ||
Resistance Measurement Resolution 100mΩ | ||
AC Voltage Measurement Resolution 0.1mV ac | ||
DC Voltage Measurement Resolution 0.1mV dc | ||
Capacitance Measurement Resolution 1pF | ||
Safety Category Level CAT II | ||
Best DC Current Accuracy ±1% + 1 Digits | ||
Height 192mm | ||
Weight 550 (With Holster)g | ||
Safety Category Voltage 600V | ||
Battery Type 9V, AAA 1.5V x 2, AM4, IEC LR03, IEC6F22, NEDA 1604 | ||
Maximum Operating Temperature +50°C | ||
Best Resistance Measurement Accuracy ±0.8% + 1 Digits | ||
Minimum Operating Temperature 0°C | ||
Best AC Current Accuracy ±2.5% + 3 Digits | ||
Width 50mm | ||
Best DC Voltage Accuracy ±0.5% + 1 Digits | ||
Dimensions 95 x 50 x 192mm | ||
Best Capacitance Measurement Accuracy ±2% + 4 Digits | ||
Length 95mm | ||
Best AC Voltage Accuracy ±1.3% + 4 Digits | ||
- Land van herkomst:
- TW
RS PRO IDM93N Rugged Industrial Digital Multimeter
RS Pro IDM93N digital multimeter designed for harsh environments. This is a handheld device which can measure capacitance, voltage, electrical current and resistance with diode and continuity check. This meter has an LCD display where the measurement readouts can be viewed. The rugged body guarantees drop prof resistance from up to 1.5 m. Featuring fuse protection on both 200 mA and 10 A current ranges.
The meter is supplied with a protective holster that includes a built-in tilt stand, a nail hook, and convenient test lead storage. This holster provides an extra degree of protection and convenience for your meter.
RS Pro IDM 91E Multimeters are designed to meet Class II IEC 1010 and UL 3111 standards for the safest operation in all applications.
This device has been designed for the most demanding users that value solid construction and highly accurate measurements.
RS Pro has a range of digital multimeters which are great value for money and are also a high quality that you can rely on.
The meter is supplied with a protective holster that includes a built-in tilt stand, a nail hook, and convenient test lead storage. This holster provides an extra degree of protection and convenience for your meter.
RS Pro IDM 91E Multimeters are designed to meet Class II IEC 1010 and UL 3111 standards for the safest operation in all applications.
This device has been designed for the most demanding users that value solid construction and highly accurate measurements.
RS Pro has a range of digital multimeters which are great value for money and are also a high quality that you can rely on.
Features and Benefits:
• 3 1/2 digit 0.8” large scale LCD
• 0.5 % basic DCV accuracy
• 0.5 % basic DCV accuracy
• 1.0 % basic DCA accuracy
• 1.5 % basic ACA accuracy
• 0.75% basic OHM accuracy
• 1.0 % FREQUENCY accuracy
• 2.0 % CAPACITANCE accuracy
• CONTINUITY and DIODE Test
• 600V protection in non-current ranges
• 500V dual fuses protection
• Auto Power Shut Off
• 1.5 m drop proof
• Protective Holster with tilt stand
• IEC 1010-1 standard CAT. II 600V
What does it measure?
DC and AC Voltages - up to 600 V
DC/AC Current - up to 10A
Resistance and continuity tester - up to 20 MΩ
Diode - open circuit voltage up to 3.2V
DC/AC Current - up to 10A
Resistance and continuity tester - up to 20 MΩ
Diode - open circuit voltage up to 3.2V
Batteries?
150 hours (Alkaline)
Two 1.5V Alkaline type AAA batteries
Low battery indicator
Auto power off - approx 30 minutes after last operation
Two 1.5V Alkaline type AAA batteries
Low battery indicator
Auto power off - approx 30 minutes after last operation
What does it include?
Installed battery
Test Leads
User manual
Test Leads
User manual
Dimensions:
Without Holster: Width 84 mm, Length 175 mm, Height 31 mm
With Holster: Width 95 mm, Length 192 mm, Height 50 mm
With Holster: Width 95 mm, Length 192 mm, Height 50 mm
Typical Applications:
A digital multimeter (DMM) is a handy test tool that measures electrical values such as voltage, current, and resistance. A DMM is used by technicians in the following areas:
Electrical and electronic industries
Safety guidelines
When using any electrical test equipment it is advised that you refer to the user’s manual for proper working operating procedures and safety precautions in order to avoid potential safety hazards.
What is the difference between an analogue and a digital multimeter?
The main difference is the display. A digital multimeter will show the results as numbers on a screen (usually a LED or LCD screen) whereas the analogue version has a needle to show the value.
A digital multimeter (DMM) is a handy test tool that measures electrical values such as voltage, current, and resistance. A DMM is used by technicians in the following areas:
Electrical and electronic industries
Safety guidelines
When using any electrical test equipment it is advised that you refer to the user’s manual for proper working operating procedures and safety precautions in order to avoid potential safety hazards.
What is the difference between an analogue and a digital multimeter?
The main difference is the display. A digital multimeter will show the results as numbers on a screen (usually a LED or LCD screen) whereas the analogue version has a needle to show the value.
Standards
IEC 61010-1: CAT.II 600V/CAT.III 300V
RS PRO IDM93N Rugged Industrial Digital Multimeter
RS Pro IDM93N digital multimeter designed for harsh environments. This is a handheld device which can measure capacitance, voltage, electrical current and resistance with diode and continuity check. This meter has an LCD display where the measurement readouts can be viewed. The rugged body guarantees drop prof resistance from up to 1.5 m. Featuring fuse protection on both 200 mA and 10 A current ranges.
The meter is supplied with a protective holster that includes a built-in tilt stand, a nail hook, and convenient test lead storage. This holster provides an extra degree of protection and convenience for your meter.
RS Pro IDM 91E Multimeters are designed to meet Class II IEC 1010 and UL 3111 standards for the safest operation in all applications.
This device has been designed for the most demanding users that value solid construction and highly accurate measurements.
RS Pro has a range of digital multimeters which are great value for money and are also a high quality that you can rely on.
Features and Benefits:
• 3 1/2 digit 0.8” large scale LCD
• 0.5 % basic DCV accuracy
• 0.5 % basic DCV accuracy
• 1.0 % basic DCA accuracy
• 1.5 % basic ACA accuracy
• 0.75% basic OHM accuracy
• 1.0 % FREQUENCY accuracy
• 2.0 % CAPACITANCE accuracy
• CONTINUITY and DIODE Test
• 300V protection in non-current ranges
• 500V dual fuses protection
• Auto Power Shut Off
• 1.5 m drop proof
• Protective Holster with tilt stand
• IEC 1010-1 standard CAT. II 600V
What does it measure?
DC and AC Voltages - up to 300 V
DC/AC Current - up to 10A
Resistance and continuity tester - up to 20 MΩ
Diode - open circuit voltage up to 3.2V
Batteries?
150 hours (Alkaline)
Two 1.5V Alkaline type AAA batteries
Low battery indicator
Auto power off - approx 30 minutes after last operation
What does it include?
Installed battery
Test Leads
User manual
Dimensions:
Without Holster: Width 84 mm, Length 175 mm, Height 31 mm
With Holster: Width 95 mm, Length 192 mm, Height 50 mm
Typical Applications:
A digital multimeter (DMM) is a handy test tool that measures electrical values such as voltage, current, and resistance. A DMM is used by technicians in the following areas:
Electrical and electronic industries
Safety guidelines
When using any electrical test equipment it is advised that you refer to the user’s manual for proper working operating procedures and safety precautions in order to avoid potential safety hazards.
What is the difference between an analogue and a digital multimeter?
The main difference is the display. A digital multimeter will show the results as numbers on a screen (usually a LED or LCD screen) whereas the analogue version has a needle to show the value.
Standards
IEC 61010-1: CAT.II 300V/CAT.III 300V
Gerelateerde Links
- RS PRO Handheld Digital Multimeter, 10A ac Max, 10A dc Max, 600V ac Max
- RS PRO IDM67 Handheld Digital Multimeter, 10A ac Max, 10A dc Max, 600V ac Max
- RS PRO IDM91E Handheld Digital Multimeter, 10A ac Max, 10A dc Max, 600V ac Max
- RS PRO RS14 Handheld Digital Multimeter, 10A ac Max, 10A dc Max, 600V ac Max
- RS PRO RS-660 Handheld Digital Multimeter, 10A ac Max, 10A dc Max, 600V ac Max
- RS PRO Handheld Digital Multimeter, 10A ac Max, 10A dc Max, 600V ac Max - RS Calibrated
- RS PRO RS-927A Handheld Digital Digital Multimeter, True RMS, 10A ac Max, 10A dc Max, 600V ac Max
- Klein Tools MM400 Handheld Digital Multimeter, 10A ac Max, 10A dc Max, 600V ac Max