Amprobe PM55A Digital Multimeter, 2 mA ac, 2 mA dc, 600 V, RSCAL Calibrated

Bekijk alle Multimeters

Subtotaal (1 eenheid)*

€ 153,42

(excl. BTW)

€ 185,64

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks
Per stuk
1 +€ 153,42

*prijsindicatie

RS-stocknr.:
432-826
Fabrikantnummer:
PM55A
Fabrikant:
Amprobe
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Amprobe

Multimeter Type

Digital

Product Type

Multimeter

Display Type

LCD

Model Number

PM55A

Functions Measured

AC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Diode Test, Frequency, Resistance

Maximum Resistance Measurement

6000kΩ

Maximum AC Voltage Measurement

600V

Maximum DC Voltage Measurement

600V

Maximum DC Current Measurement

2mA dc

Maximum AC Current Measurement

2mA ac

True RMS

No

AC Voltage Accuracy

±1.5 % rdg + 5 Digits

DC Voltage Accuracy

±1.5 % rdg + 5 Digits

AC Voltage Resolution

1mV ac

DC Voltage Resolution

1 mV dc

Maximum Frequency

30kHz

Power Source

Battery

Minimum Operating Temperature

0°C

Resistance Measurement Accuracy

±2 % rdg + 4 Digits

Maximum Operating Temperature

40°C

Height

10.2mm

Weight

78g

Standards/Approvals

No

Length

113mm

Width

53mm

Safety Category Level

CAT II

Safety Category Voltage

300V, 600V

Calibrated

RSCAL

Battery Type

CR2032

Vrijgesteld

Land van herkomst:
TW

Fluke Multimeter, 600V Safety Category Voltage, 78g Weight - PM55A


This multimeter is a handheld digital instrument designed to measure electrical parameters in field and workshop settings. It operates from a CR2032 battery and provides a range of AC and DC measurements, Plus Basic component checks, for routine electrical troubleshooting and verification within a 0°C-40°C ambient.

Features and Benefits:


• ±1.5% DC accuracy delivers precise voltage readings
• 1mV DC resolution enables fine voltage discrimination
• 600V safety rating allows work on low-voltage installations
• 6000kΩ resistance range assesses high-value components
• 30kHz frequency capability measures common signal sources
• 2mA current range supports low-current diagnostics

Applications


• Suitable for fault-finding in domestic electrical systems
• Ideal for testing component values on small PCBs
• Used for measuring supply voltages up to 600V
• Can be used for frequency checks on control circuits
• Used with diodes and capacitors for Basic component tests

What battery type powers the device?


It uses a CR2032 coin cell battery for Compact power.

What environmental limits affect operation?


It is rated to operate between 0°C and 40°C.

What safety classification applies to voltage work?


The instrument is rated to CAT II for voltages up to 600V.

What display and measurement format does it use?


Measurements are shown on a digital display with true numerical readouts.

How much does the instrument weigh for portability?


The unit has a mass of 78 g.

Note

This instrument is fitted with fixed test leads. Use of an alternative instrument is advised where GS38 compliant leads (fused test leads) are required.

Supplied with

Protective silicon holster, attached test leads, battery, deluxe carry case and instruction manual.

Gerelateerde Links