Onlangs gezocht

    RS PRO Test Lead Kit, Crocodile Clip, Right Angle Plug, Spring Hook, Straight Plug, 1.2m, CAT III

    RS-stocknr.:
    731-5277
    Fabrikant:
    RS PRO
    RS PRO
    3yearwarllbenl.jpg3yearwarllbefr.jpg
    Bekijk alle Multimeter Leads
    21 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
    93 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    43,47 €

    (excl. BTW)

    52,60 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 +43,47 €
    RS-stocknr.:
    731-5277
    Fabrikant:
    RS PRO
    Land van herkomst:
    GB

    Wetgeving en conformiteit

    Land van herkomst:
    GB

    Productomschrijving

    RS PRO Multimeter Lead Set in Pouch


    RS PRO practical lead sets supplied in a durable grey pouch with attractive yellow piping. The standard set (731-5277) has a wide range of accessories for taking measurements in most situations. The fused set (731-5273) has extra fused test probes complying with the requirement of GS38 safety guidance for use on high energy circuits while taking voltage measurements. Both sets comply with IEC1010-1 cat III 600 V safety standard.

    RS PRO have a wide range of test leads, multimeters and accessories that have been RS approved meaning that the products are value for money and high-quality you can rely on. Replacement fuses can be purchased please see RS Stock no. 161-1530.

    Contents Standard Set


    2 x 1.2 m silicone multimeter leads with shrouded 4 mm terminations one end straight, one end right-angled, (red and black), 2 x crocodile clips (red and black), 2 x long reach multimeter probes fuse rating to 1000 V 600 mA (red and black), 2 x spring loaded, grabber multimeter probes (red and black).
    Extra items in fused sets, 2 x fused probes with only 4 mm of exposed metal tip fitted with 1.25" ceramic fuses rated at 660 V 500 mA.

    Also available:
    Thin fine insulated prods set 262-7770 for use with fused test prods and multimeter test lead sets
    Shuttered lantern probe set 262-7786 for use with fused test prods and multimeter test lead sets.

    Typical applications
    Test leads play an important part in electrical measurement especially when connecting a digital multimeter to the unit under test.
    Test and Measurement

    Safety Precautions
    Always inspect the test probes for cracks and frayed leads before each use. If defects are found, do not use the probe.

    Warning

    Burns, due to arcing or flashover resulting from the use of unsatisfactory test probes, account for more accidents in electrical testing than are caused by electric shock. Because of this, fused test leads with 2mm or less of exposed insulation are recommended for electrical use by the HSE in their guidance.

    Standards

    IEC 1010 Cat III 600V

    Specificaties

    KenmerkWaarde
    Lead TypeTest Lead Kit
    Connector TypeCrocodile Clip, Right Angle Plug, Spring Hook, Straight Plug
    Lead Length1.2m
    Safety Category Voltage600V
    Safety CategoryCAT III 600V
    Minimum Operating Temperature-20°C
    Maximum Operating Temperature+70°C
    Safety Category LevelCAT III
    21 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
    93 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    43,47 €

    (excl. BTW)

    52,60 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 +43,47 €