Fluke 179 IMSK Multimeter Kit

Bekijk alle Multimeter Kits

Subtotaal (1 eenheid)*

€ 650,00

(excl. BTW)

€ 786,50

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Beperkte voorraad
  • 12 resterend, klaar voor verzending
  • 8 stuk(s) klaar voor verzending vanaf een andere locatie
  • Plus verzending 2 stuk(s) vanaf 28 mei 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 650,00

*prijsindicatie

Kalibratie-opties

presentation
Fluke 179 IMSK Multimeter Kit, RSCAL
Calibration Type:
RSCAL
RS-stocknr.
194-7423

Per stuk

€ 756,50

(excl. BTW)

€ 915,36

(incl. BTW)

presentation
Fluke 179 IMSK Multimeter Kit, UKAS
Calibration Type:
UKAS
RS-stocknr.
194-7424

Per stuk

€ 804,00

(excl. BTW)

€ 972,84

(incl. BTW)

RS-stocknr.:
194-6808
Artikelnummer Distrelec:
301-65-730
Fabrikantnummer:
FLUKE-179-2/IMSK
Fabrikant:
Fluke
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Fluke

Model Number

179 IMSK

Product Type

Multimeter Kit

Application

Industrial

Kit Contents

Test Lead Set, Clamp Meter, Multimeter, Probe

Standards/Approvals

No

Fluke Multimeter Kit, Test Lead Set Included, Test Lead Set Included - FLUKE-179-2/IMSK


This multimeter kit combines a true-rms digital multimeter and a matching clamp meter to support frontline electrical and electronic troubleshooting in industrial environments. It provides measurements across voltage, current, resistance, capacitance and frequency while including a temperature probe and test lead accessories to extend diagnostic capability for automation, electronics and mechanical maintenance tasks.

Features & Benefits


• True-rms AC voltage and current for accurate non-linear signal readings
• Measures up to 1000VAC/DC on the multimeter for high-voltage diagnostics
• Clamp meter measures AC current to 400A for live conductor checks
• Resistance measurement to 50MΩ for component and circuit verification
• Frequency measurement to 100kHz for signal analysis and motor testing
• Includes temperature probe and hard-point leads for broader diagnostics

**Applications**


• Suitable for commissioning and fault-finding in industrial control panels
• Ideal for current checks on motors and distribution circuits
• Used for verifying sensor signals and frequency in automation systems
• Can be used for resistance and continuity checks on electrical assemblies
• Used with plant maintenance teams for routine electrical inspections

What safety ratings apply when working on distribution systems?


The clamp meter carries CAT III 600V and CAT IV 300V category ratings for use on distribution and feeder circuits within those limits.

How does the kit assist when working with non-sinusoidal waveforms?


Both instruments provide true-rms measurement, which yields accurate readings on distorted or non-linear AC signals.

What temperature range can be measured with the kit’s probe?


The multimeter accepts the included temperature probe for measurements from -40°C to 400°C.

How long will the multimeter operate on standard batteries without backlight?


Typical alkaline battery life is approximately 200 hours under normal use without the backlight enabled.

What mechanical form factors aid field use?


The clamp meter accepts conductors up to 30mm diameter and the multimeter is Compact and lightweight for handheld tasks.

Supplied with

Fluke 179 True-RMS Digital Multimeter
Fluke 323 True-RMS Clamp Meter
80BK-A DMM Temperature Probe
TL75 Hard Point Test Lead Set
AC175 Threaded Alligator Clip Set

Gerelateerde Links