Fluke 1662 Multifunction Tester 10000V With Wireless

RS-stocknr.:: 117-6665
Artikelnummer Distrelec:: 300-60-456
Fabrikantnummer:: FLK-1662 SCH
Fabrikant:: Fluke

Fluke 1662 Multifunction Tester 10000V With Wireless

Subtotaal (1 eenheid)*

€ 1.043,00

(excl. BTW)

€ 1.262,03

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 80,00

Op voorraad

Plus verzending 12 stuk(s) vanaf 30 maart 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 1.043,00

*prijsindicatie

RS-stocknr.:: 117-6665
Artikelnummer Distrelec:: 300-60-456
Fabrikantnummer:: FLK-1662 SCH
Fabrikant:: Fluke

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Fluke
	Product Type	Multifunction Tester
	Loop Impedance Test Type	Phase to Earth, Phase to Neutral
	Automatic RCD Test	Yes
	Model Number	1662
	RCD Ramp Test	Yes
	Insulation Test Voltage	10000V
	Maximum Voltage Measurement	1000V
	Test Type	Frequency, Miniature GPS, RCD Test, Insulation Resistance, Voltage, Wiring Polarity, Phase Sequence Test, Resistance, Continuity, MOSFET
	Interface Type	Wireless
	Continuity Test Current	10mA
	RCD Test Type	Type S, Type G, AC
	Battery Life	200h
	Width	250mm
	Standards/Approvals	CE, CSA, UL 61010, ANSI/ISAs82.02.01 2000, EN 610101 Ed 2.0 (200102)
	Weight	1.3kg
	Length	100mm
	Remote Switch Mode	Yes
	Height	125mm
	Test Standards	IEC 60364
	IP Rating	IP40
	Power Source	Battery
	Battery Type	AA
	Display Type	LCD
	Maximum Continuity Resistance	2000Ω
	Safety Category Level	CAT III, CAT IV
	Minimum Continuity Resistance	20Ω
	Safety Category Voltage	500V

	Alles selecteren
	Merk Fluke
	Product Type Multifunction Tester
	Loop Impedance Test Type Phase to Earth, Phase to Neutral
	Automatic RCD Test Yes
	Model Number 1662
	RCD Ramp Test Yes
	Insulation Test Voltage 10000V
	Maximum Voltage Measurement 1000V
	Test Type Frequency, Miniature GPS, RCD Test, Insulation Resistance, Voltage, Wiring Polarity, Phase Sequence Test, Resistance, Continuity, MOSFET
	Interface Type Wireless
	Continuity Test Current 10mA
	RCD Test Type Type S, Type G, AC
	Battery Life 200h
	Width 250mm
	Standards/Approvals CE, CSA, UL 61010, ANSI/ISAs82.02.01 2000, EN 610101 Ed 2.0 (200102)
	Weight 1.3kg
	Length 100mm
	Remote Switch Mode Yes
	Height 125mm
	Test Standards IEC 60364
	IP Rating IP40
	Power Source Battery
	Battery Type AA
	Display Type LCD
	Maximum Continuity Resistance 2000Ω
	Safety Category Level CAT III, CAT IV
	Minimum Continuity Resistance 20Ω
	Safety Category Voltage 500V

Vrijgesteld

Land van herkomst:: GB

Fluke Multifunction Tester, 500V Maximum Voltage Measurement, 1000V Insulation Test Voltage - FLK-1662 SCH

This multifunction tester is a portable electrical diagnostic instrument designed for comprehensive verification of circuits and protective devices across industrial and commercial sites. It supports a broad range of electrical measurements, from voltage and frequency checks to RCD and insulation evaluations, and is intended for use where fast, accurate assessment of wiring, protection and continuity is required.

Features & Benefits

• Measures up to 500V AC/DC enabling high-voltage verification
• Insulation tests to 1000V for robust fault finding
• RCD ramp and automatic tests for precise trip characterisation
• Continuity current of 1mA for sensitive continuity assessments
• Wireless Interface enabling remote switching and data transfer
• MOSFET-based continuity and resistance testing for stable outputs

Applications

• Suitable for commissioning power distribution and protective devices
• Ideal for verifying RCD performance during periodic testing
• Used for insulation resistance measurements on motors and cables
• Can be used for loop impedance checks phase to earth on installations
• Suitable for fieldwork where battery operation and portability are required

What power source does it use for field operations?

It runs on AA batteries and provides extended operation with a rated battery life of 200 h.

Which safety categories does it meet for live work?

It is rated to work within CAT III and CAT IV environments at 500V and 300V respectively.

How does the device handle loop impedance measurements?

Loop impedance testing covers phase-to-earth and phase-to-neutral modes to identify prospective fault currents and verify protective conductors.

What environmental protection does the enclosure provide?

The unit has an IP40 ingress rating suitable for indoor site conditions where solid-object protection is required.

Which standards govern its test routines?

Test sequences are implemented to align with IEC 60364 requirements and the instrument carries recognised approvals such as CE, CSA and UL 61010.

Note

Fluke 1662 replaces the existing Fluke 1651 and Fluke 1652.

Standards

IEC 60364

Supplied with

The Fluke 1662 comes with 6 x AA (LR6) cell batteries, CI600 hard carrying case, zero adapter, heavy-duty mains cord, test lead set, padded carrying/waist strap, quick reference guide, TP165X remote control probe & lead set (FTP used probes - UK only) and User's manual on CD-ROM.