Fluke 1664FC Multifunction Tester, 50 V, 100 V, 250 V, 500 V, 1000 V , Earth Resistance Measurement With BLE, USB

RS-stocknr.:: 113-5131
Fabrikantnummer:: FLK-1664FC UK
Fabrikant:: Fluke

Fluke 1664FC Multifunction Tester, 50 V, 100 V, 250 V, 500 V, 1000 V , Earth Resistance Measurement With BLE, USB

Subtotaal (1 eenheid)*

€ 2.241,00

(excl. BTW)

€ 2.711,61

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 75,00

Tijdelijk niet op voorraad

Verzending 4 stuk(s) vanaf 25 december 2025

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 2.241,00

*prijsindicatie

RS-stocknr.:: 113-5131
Fabrikantnummer:: FLK-1664FC UK
Fabrikant:: Fluke

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Fluke
	Loop Impedance Test Type	Phase to Earth, Phase to Neutral
	Automatic RCD Test	Yes
	Model Number p	1664FC
	RCD Ramp Test	Yes
	Insulation Test Voltage	50 V, 100 V, 250 V, 500 V, 1000 V
	Maximum Voltage Measurement	500V ac/dc
	Test Type	Continuity, Frequency, Insulation Resistance, Loop and Line Resistance, Measure Motor Windings, Phase Sequence Test, Prospective Earth Fault Current, Prospective Short Circuit Current, RCD Test, Resistance, Voltage, Wiring Polarity
	Earth Resistance Measurement	Yes
	Downloadable Data	Yes
	Interface Type	BLE, USB
	Continuity Test Current	10mA
	RCD Test Type	A/F, AC, B/B+, G, S
	Remote Switch Mode	Yes
	Test Standards	IEC 60364
	IP Rating	IP40
	Battery Type	AA
	Height	125mm
	Voltage Measurement Range	50 → 1000V
	Safety Category Level	CAT III, CAT IV
	Width	250mm
	Power Source	Battery
	Minimum Continuity Resistance	20Ω
	Length	100mm
	Dimensions	100 x 250 x 125mm
	Safety Category	CAT III 500 V, CAT IV 300 V
	Weight	1.3 (with Battery)kg
	Maximum Continuity Resistance	2000Ω
	Plug Type	UK
	Safety Category Voltage	300 V, 500 V

	Alles selecteren
	Merk Fluke
	Loop Impedance Test Type Phase to Earth, Phase to Neutral
	Automatic RCD Test Yes
	Model Number p 1664FC
	RCD Ramp Test Yes
	Insulation Test Voltage 50 V, 100 V, 250 V, 500 V, 1000 V
	Maximum Voltage Measurement 500V ac/dc
	Test Type Continuity, Frequency, Insulation Resistance, Loop and Line Resistance, Measure Motor Windings, Phase Sequence Test, Prospective Earth Fault Current, Prospective Short Circuit Current, RCD Test, Resistance, Voltage, Wiring Polarity
	Earth Resistance Measurement Yes
	Downloadable Data Yes
	Interface Type BLE, USB
	Continuity Test Current 10mA
	RCD Test Type A/F, AC, B/B+, G, S
	Remote Switch Mode Yes
	Test Standards IEC 60364
	IP Rating IP40
	Battery Type AA
	Height 125mm
	Voltage Measurement Range 50 → 1000V
	Safety Category Level CAT III, CAT IV
	Width 250mm
	Power Source Battery
	Minimum Continuity Resistance 20Ω
	Length 100mm
	Dimensions 100 x 250 x 125mm
	Safety Category CAT III 500 V, CAT IV 300 V
	Weight 1.3 (with Battery)kg
	Maximum Continuity Resistance 2000Ω
	Plug Type UK
	Safety Category Voltage 300 V, 500 V

Vrijgesteld

Land van herkomst:: GB

Fluke 1664 FC Multifunction Installation Testers

Fluke 1664 part of the 1660 Series. The new Fluke 1660 series verify the safety of electrical installations in domestic, commercial and industrial applications. They ensure that fixed wiring is safe and correctly installed to meet the requirements of IEC 60364 and all relevant local standards. Fluke 1660 series are the only testers that help prevent damage to connected appliances.

Fluke 1664 FC contains the Insulation-PreTest™ safety function (patent pending). This function prevents you from performing tests with appliances that are connected to the system during test, eliminating accidental damage.
With the addition of Fluke Connect, you can now send test results directly to your smartphone. The results can then be transmitted to other members of the team. Data can also be saved to Fluke Cloud™ Storage, reducing the amount of paperwork and possible errors. It is a secure and accurate way to store test data and create test certificates with Fluke DMS (data management software).

Features

Insulation-PreTest™ safety function
Insulation at L-N, N-PE inputs
Automatic test sequence
Continuity at L-N, N-PE inputs
Fluke Connect® compatibility
ShareLive™ Calling
FlukeCloud™ Storage
On/Off switchable auto-start for RCD and looptest
Z max memory
Heavy duty, single input line cord

Standards

IEC 60364

Supplied with

The Fluke 1664 FC comes with 6 x AA (LR6) cell batteries, CI600 hard carrying case, zero adapter, heavy-duty mains cord, test lead set, padded carrying/waist strap, quick reference guide, TP165X remote control probe & lead set (FTP used probes - UK only) and User's manual on CD-ROM.

Fluke 1663/1664 FC Multifunction Tester includes a feature to test 6mA RDC-DD, in accordance with international standards IEC 62955 and
IEC 61851-1. The new 6mA testing functionality adds an important feature to our already comprehensive testing solutions for electric vehicle supply equipment (EVSE), making it easier for our customers to perform all necessary tests in one go.