Metrel A1732 Adapter 1000V With Bluetooth, USB
- RS-stocknr.:
- 859-027
- Fabrikantnummer:
- A1732
- Fabrikant:
- Metrel
Subtotaal (1 eenheid)*
€ 6.990,00
(excl. BTW)
€ 8.457,90
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Nieuw product (vandaag reserveren)
- Verzending vanaf 21 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 6.990,00 |
*prijsindicatie
- RS-stocknr.:
- 859-027
- Fabrikantnummer:
- A1732
- Fabrikant:
- Metrel
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Metrel | |
| Product Type | Adapter | |
| Model Number | A1732 | |
| Insulation Test Voltage | 1000V | |
| Maximum Voltage Measurement | 1000V | |
| Test Type | Insulation | |
| Downloadable Data | Yes | |
| Interface Type | Bluetooth, USB | |
| Continuity Test Current | 200mA | |
| Standards/Approvals | EN 61326 | |
| Width | 50cm | |
| Weight | 16.2kg | |
| Remote Switch Mode | Yes | |
| Length | 410.00mm | |
| Height | 25cm | |
| IP Rating | IP40 | |
| Test Standards | EN | |
| Minimum Operating Temperature | -10°C | |
| Safety Category Level | CAT III | |
| Safety Category Voltage | 300V | |
| Power Source | Mains Supply | |
| Maximum Operating Temperature | 40°C | |
| Alles selecteren | ||
|---|---|---|
Merk Metrel | ||
Product Type Adapter | ||
Model Number A1732 | ||
Insulation Test Voltage 1000V | ||
Maximum Voltage Measurement 1000V | ||
Test Type Insulation | ||
Downloadable Data Yes | ||
Interface Type Bluetooth, USB | ||
Continuity Test Current 200mA | ||
Standards/Approvals EN 61326 | ||
Width 50cm | ||
Weight 16.2kg | ||
Remote Switch Mode Yes | ||
Length 410.00mm | ||
Height 25cm | ||
IP Rating IP40 | ||
Test Standards EN | ||
Minimum Operating Temperature -10°C | ||
Safety Category Level CAT III | ||
Safety Category Voltage 300V | ||
Power Source Mains Supply | ||
Maximum Operating Temperature 40°C | ||
- Land van herkomst:
- SI
The Metrel Adapter is the ultimate diagnostic solution for testing electric vehicle charging stations. It safely simulates vehicle states to fully Streamline your engineering commissioning and ongoing maintenance workflows.
Built in load simulator up to 300 V to test station power delivery
Rugged design featuring dual protective earth test terminals for safety
Gerelateerde Links
- RS PRO 4 Way Male 4 Pin Molex to 4 Way Female 4 Pin Molex Wire to Board Cable, 2m
- Carling Technologies Illuminated DPDT, On-(On) Rocker Switch Panel Mount
- Pilz PNOZ X PNOZ X3 Emergency Stop Safety Relay, 24 V dc, 110V ac, Dual-Channel, 3 Safety Contacts
- Siemens SIMATIC S7-1200 Series PLC CPU for Use with SIMATIC S7-1200 Series, Digital, Transistor Output, 14 (Digital, 2
- PR Electronics 4100 Series Universal Transmitter, Universal Input, Current, Voltage Output, 19.2 → 300 V dc,
- Pilz PNOZ X PNOZ X1 Emergency Stop Safety Relay, 24V ac/dc, Single Channel, 3 Safety Contacts
- PR Electronics 4100 Series Universal Transmitter, Universal Input, Current, Voltage, Relay Output, 19.2 → 300 V
- Siemens LOGO! Series PLC CPU Starter Kit for Use with LOGO! V8.3, 115 V ac/dc, 230 V ac/dc Supply, Relay Output,