onsemi, Stepper Motor Driver IC 24-Pin, SSOP
- RS-stocknr.:
- 189-0248
- Fabrikantnummer:
- NCV7750DPR2G
- Fabrikant:
- onsemi
Subtotaal (2500 eenheden, op een rol van 2500)*
€ 2.897,50
(excl. BTW)
€ 3.505,00
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Laatste voorraad RS
- Laatste 2.500 stuk(s), klaar voor verzending vanaf een andere locatie
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 2500 + | € 1,159 | € 2.897,50 |
*prijsindicatie
- RS-stocknr.:
- 189-0248
- Fabrikantnummer:
- NCV7750DPR2G
- Fabrikant:
- onsemi
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | onsemi | |
| Motor Type | Stepper | |
| Product Type | Motor Driver IC | |
| Mount Type | Surface | |
| Package Type | SSOP | |
| Output Current | 1.3A | |
| Pin Count | 24 | |
| Minimum Supply Voltage | -0.3V | |
| Maximum Supply Voltage | 5.5V | |
| Typical Switching Frequency | 5MHz | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Standards/Approvals | Pb-Free | |
| Width | 3.9mm | |
| Height | 1.5mm | |
| Series | NCV7750 | |
| Length | 8.65mm | |
| Inverter Power Rating | 100mW | |
| Supply Current | 3mA | |
| Automotive Standard | AEC-Q100 | |
| Alles selecteren | ||
|---|---|---|
Merk onsemi | ||
Motor Type Stepper | ||
Product Type Motor Driver IC | ||
Mount Type Surface | ||
Package Type SSOP | ||
Output Current 1.3A | ||
Pin Count 24 | ||
Minimum Supply Voltage -0.3V | ||
Maximum Supply Voltage 5.5V | ||
Typical Switching Frequency 5MHz | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Standards/Approvals Pb-Free | ||
Width 3.9mm | ||
Height 1.5mm | ||
Series NCV7750 | ||
Length 8.65mm | ||
Inverter Power Rating 100mW | ||
Supply Current 3mA | ||
Automotive Standard AEC-Q100 | ||
Power Up without Open Circuit Detection
Low Quiescent Current
16 bit SPI control
Limp Home Functionality
3.3V and 5V compatible Digital Input Supply Range
Fault Reporting of Open Load, Over Load, and Over Temperature
Power On Reset
Uniform output structure of all outputs on one side of the package.
4 Channels
600 mA Low-Side Drivers
Parallel Input Pins
Allows for power up without LED load illumination.
Able to report errors and is capable of daisy chain connections.
Automotive system feature allowing the vehicle to maintain operation with a defective micro processor.
Suitable for both 3.3V and 5V micro processor interfaces.
The micro processor and report unusual activity for troubleshooting and system integrity purposes.
Maintains a smooth system power up and power down.
Simplifies printed circuit board layouts.
Automotive requirement maintains site and change control.
Applications
Relay Driver
LED Driver.
Stepper Motor Driver
End Products
Automotive Body Control Unit
Automotive Engine Control Unit
Gerelateerde Links
- onsemi NCV7750DPR2G, Stepper Motor Driver IC 24-Pin, SSOP
- onsemi, DC Motor Motor Driver IC 24-Pin, SSOP
- onsemi NCV7720DQAR2G, DC Motor Motor Driver IC 24-Pin, SSOP
- onsemi NCV7719DQAR2G, DC Motor Motor Driver IC 24-Pin, SSOP
- onsemi NCV7726DQBR2G, DC Motor Motor Driver IC 24-Pin, SSOP
- onsemi, DC Motor Motor Driver IC, 45 V 500 mA 24-Pin, SSOP
- onsemi NCV7724DQBR2G, DC Motor Motor Driver IC, 45 V 500 mA 24-Pin, SSOP
- MPS, Stepper Motor Motor Driver IC 24-Pin, QFN-24