Microchip, Brushless DC Motor Driver 40-Pin, VQFN
- RS-stocknr.:
- 352-173P
- Fabrikantnummer:
- ATA6847T-3333E/NHX
- Fabrikant:
- Microchip
Subtotaal 2 eenheden (geleverd op een doorlopende strip)*
€ 2,13
(excl. BTW)
€ 2,58
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- Plus verzending 3.300 stuk(s) vanaf 27 oktober 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 2 + | € 1,065 |
*prijsindicatie
- RS-stocknr.:
- 352-173P
- Fabrikantnummer:
- ATA6847T-3333E/NHX
- Fabrikant:
- Microchip
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Microchip | |
| Motor Type | Brushless | |
| Product Type | DC Motor Driver | |
| Configuration | 3 Phase | |
| Mount Type | Surface | |
| Package Type | VQFN | |
| Output Current | 2A | |
| Pin Count | 40 | |
| Maximum Supply Voltage | 42V | |
| Minimum Supply Voltage | 3V | |
| Typical Switching Frequency | 50kHz | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Length | 5mm | |
| Standards/Approvals | ISO 26262:2018, ASIL B, SIL 2, RoHS, IEC 61508:2010 | |
| Height | 900μm | |
| Width | 5mm | |
| Supply Current | 15μA | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Microchip | ||
Motor Type Brushless | ||
Product Type DC Motor Driver | ||
Configuration 3 Phase | ||
Mount Type Surface | ||
Package Type VQFN | ||
Output Current 2A | ||
Pin Count 40 | ||
Maximum Supply Voltage 42V | ||
Minimum Supply Voltage 3V | ||
Typical Switching Frequency 50kHz | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Length 5mm | ||
Standards/Approvals ISO 26262:2018, ASIL B, SIL 2, RoHS, IEC 61508:2010 | ||
Height 900μm | ||
Width 5mm | ||
Supply Current 15μA | ||
Automotive Standard No | ||
- Land van herkomst:
- TH
The Microchip 3 Phase Brushless Motor Gate Driver System Basis Chip (SBC) for brushless motor control, designed using advanced SOI technology. In combination with a microcontroller and six discrete power MOSFETs, the SBC forms a brushless DC motor control unit. Through six dedicated parallel inputs, the gate driver units (GDU) can be controlled independently, supporting duty cycle operations from 0% to 100%, due to the implementation of two charge pumps, for low and high-side gate drives. In addition, the circuit provides 5V and 3.3V low dropout voltage regulators, two current-sensing operational amplifiers, an integrated Back-EMF detection module and a window watchdog. The microcontroller controls the ATA6847 using an SPI interface.
Power supply voltage range from 3V to 42V
Sleep deep sleep mode with maximum 15 μA current consumption with full wake-up capability local wake-up
3.3V or 5V microcontroller interface
Up to 4 MHz SPI bus for device configuration and register access
SPI frame error detection
Dedicated NIRQ pin for MCU external interrupt to report events directly
Gerelateerde Links
- Pilz PNOZ X PNOZ X3 Emergency Stop Safety Relay, 24 V dc, 110V ac, Dual-Channel, 3 Safety Contacts
- RS PRO 4 Way Male 4 Pin Molex to 4 Way Female 4 Pin Molex Wire to Board Cable, 2m
- PR Electronics 4100 Series Universal Transmitter, Universal Input, Current, Voltage Output, 19.2 → 300 V dc,
- Festo Natural Round Plastic Tube x 4mm OD x 2.6mm ID x 1.4mm
- Siemens SIMATIC S7-1200 Series PLC CPU for Use with SIMATIC S7-1200 Series, Digital, Transistor Output, 14 (Digital, 2
- PR Electronics 4100 Series Universal Transmitter, Universal Input, Current, Voltage, Relay Output, 19.2 → 300 V
- Siemens LOGO! Series PLC CPU Starter Kit for Use with LOGO! V8.3, 115 V ac/dc, 230 V ac/dc Supply, Relay Output,
- Pilz PNOZ X PNOZ X1 Emergency Stop Safety Relay, 24V ac/dc, Single Channel, 3 Safety Contacts