Actuonix Motor Controller, 24V dc, 5 V dc, 4A

Bekijk alle Motor Controllers
Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 78,58

(excl. BTW)

€ 95,08

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 4 stuk(s) vanaf 13 april 2026
  • Plus verzending 39 stuk(s) vanaf 13 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 - 4€ 78,58
5 - 9€ 75,44
10 +€ 73,87

*prijsindicatie

RS-stocknr.:
918-1372
Fabrikantnummer:
LAC-RS
Fabrikant:
Actuonix
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Actuonix

Product Type

Motor Controller

Supply Voltage

24, 5V dc

Output Voltage

3.3V

Current Rating

4A

Overall Length

50mm

Overall Width

50mm

Minimum Operating Temperature

-10°C

Maximum Operating Temperature

70°C

Standards/Approvals

No

Linear Actuator Control Board


The LAC board from Actuonix is a standalone closed loop control board specially designed for the P series actuators. By using this LAC board with Actuonix actuators you can greatly simplify motor control designs, saving cost and time.

Actuonix motor control IC uses a software-based algorithm which optimises position and speed control. The linear actuator board is then compatible with a wide range of actuators, using only the default settings.

Full customisation is possible due to Actuonix Advanced Configuration Program.

The LAC can be operated as an interface board or a standalone controller with the addition of an external potentiometer and power supply.

Control Modes


0 V to 3.3 V Interface Mode


This mode allows an actuator to be controlled with just a battery, and a potentiometer to signal the desired position to the actuator.

RC Servo Interface Mode


A standard hobby-type remote-control digital servo interface, compatible with servos and receivers from other manufacturers.

4 mA to 20 mA Interface Mode


This mode is compatible with PLC devices typically used in industrial control applications.

PWM Mode


This mode allows control of the actuator using a single digital output pin from an external micro controller.

USB Mode


This mode allows control of the actuator via the computer.

Features and Benefits


• Several control modes available

• Compatible with P series actuators

• Can be operated as an interface board or standalone controller

Application Information


The LAC works with the PQ12-P, L12-P, L16-P and P16-P series actuators. It can also be able to drive other larger actuators that have position feedback.


Micro Linear Actuators


Note

A 6 vdc or 12 vdc power supply is required for operation (not included)

Gerelateerde Links